



1 / 4
Sun Hydraulics CKEB-XAN 先導開啟單向閥芯
極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
| 閥型別 | Pilot-to-Open Check Valve |
|---|---|
| 型腔 | T-2A |
| 供應能力 | 30 GPM (113 L/min) |
| 引航比 | 3:1 |
| 切入壓力 | 4 PSI (0.3 bar) |
| 最大工作壓力 | 5000 PSI (345 bar) |
| 控制型別 | Standard Pilot (Non-Sealed) |
| 座椅材料 | Steel |
| Non Vented | Non-Vented |
| 密封材料 | Buna-N (Nitrile) |
| 安裝扭矩 | 45-50 lbf-ft (61-68 Nm) |
| 安裝螺紋 | 1"-14 UNS |
| Construction Style | Floating Style |
| 流量配置 | Free Flow Port 2 to Port 1; Pilot Port 3 Opens Port 1 to Port 2 |
| 淨重 | 0.6 kg |
| 包裝尺寸 | 10 × 10 × 10 cm |
製造號
- CKEB-XAN
- CKEBXAN
- CKEB XAN
主機廠號
- 77722581
互換號
- CO2A3003N
The Sun Hydraulics CKEB-XAN is a pilot-to-open check valve cartridge designed for hydraulic load-holding and directional control applications. It features a T-2A cavity configuration with a 1"-14 UNS thread. The valve allows free flow from port 2 to port 1 and blocks flow from port 1 to port 2 until pilot pressure is applied at port 3 at a 3:1 pilot ratio.
This model incorporates Sun floating-style construction to minimize internal binding caused by excessive installation torque or cavity machining variations. It utilizes a non-sealed pilot design with a steel seat and non-vented configuration. The standard pilot control (X) is paired with a 4 PSI (0.3 bar) cracking pressure (A) and Buna-N seals (N). Maximum operating pressure is rated at 5000 PSI (345 bar) with a nominal flow capacity of 30 GPM (113 L/min). Installation torque is specified at 45-50 lbf-ft (61-68 Nm).
同系技術配件與配套推薦

Sun Hydraulics CKCD-XAN 液控單向閥
CKCD-XANSun Hydraulics

Sun Hydraulics CKED-XDN 液控單向閥插裝件
CKED-XDNSun Hydraulics

山貓 6669212 單向閥閥芯
6669212Bobcat

小松 709-25-11650 單向閥總成
709-25-11650Komatsu

壽力 02250110-557 止回閥
02250110-557Sullair

久保田 1C010-42460 燃油單向閥總成
1C010-42460Kubota

英格索蘭 22380216 止回閥總成
22380216Ingersoll Rand

英格索蘭 46525275 止回閥
46525275Ingersoll Rand
