XZR8® 鑫眾潤
久保田 D782 D782-EBH 大修重組套件

久保田 D782 D782-EBH 大修重組套件


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
適用發動機Kubota D782 / D782-EBH
氣缸配置3-Cylinder Inline
孔徑尺寸67 mm
衝程長度73.6 mm
排量0.778 L (778 cc)
吸氣型別Naturally Aspirated
冷卻系統Liquid Cooled
燃油型別Diesel
套件元件Pistons, Rings, Pins, Liners, Rod Bearings, Main Bearings, Thrust Washers, Full Gasket Set
尺寸STD
超大尺寸+0.25 mm, +0.50 mm
淨重6.5 kg

製造號

  • D782
  • D782-EBH
  • D782E
  • D782-BH
  • D782-EKBH
  • XHT55058430882

主機廠號

  • 16873-99354
  • 1G008-03040
  • 1G688-21112
  • 16851-02310

發動機號

  • Kubota D782
  • Kubota D782-EBH
  • Kubota D782E
  • Kubota D782-BH
  • Komatsu 3D67E

互換號

  • CP-EN-B55801-01
  • XHT55058430882

適配車型

  • Kubota B7410
  • Kubota B1820
  • Kubota BX1800D
  • Kubota BX1830D
  • Kubota G1900
  • Kubota GR2110
  • Kubota JB14
  • Kubota JB15X
  • Kubota B1181
  • Kubota K008
  • Kubota KX015-4
  • Kubota KX016-4
  • Kubota KX36-3
  • Kubota KX41
  • Kubota U15
  • Kubota U17
  • Kubota ZD1011
  • Kubota ZD321
  • Kubota ZG332P
  • Kubota GR2100
  • Kubota GR2120
  • Bobcat 320
  • Bobcat 322
  • Panda PMS 14000
This overhaul rebuild kit is engineered for the Kubota D782 and D782-EBH series 3-cylinder, 0.778-liter liquid-cooled diesel engines. The kit encompasses critical rotating and sealing components including three semi-finished cylinder liners, pistons with pins and rings (STD bore 67 mm, stroke 73.6 mm), connecting rod bearings, main bearings, thrust washers, and a complete upper and lower gasket set. Components are manufactured to OEM dimensional tolerances to restore factory compression ratios and oil clearance specifications. Primary applications span Kubota compact tractors (B7410, B1820, BX1800D, BX1830D, G1900, GR2110, JB14, JB15X), mini excavators (K008, KX015-4, KX016-4, U15, U17), zero-turn mowers (ZD1011, ZD321, ZG332P, GR2100), and Bobcat 320/322 loaders. Cross-references Kubota OEM component numbers 16873-99354 (gasket set), 1G688-21112 (piston), 16851-02310 (liner), and 1G008-03040 (cylinder head). Verify bearing undersize requirements (+0.25 mm, +0.50 mm) prior to assembly. Installation must follow OEM torque sequences and break-in procedures.