XZR8® 鑫眾潤
博世 0433271746 DLLA150S1066 燃油噴油嘴
博世 0433271746 DLLA150S1066 燃油噴油嘴 - Image 2
博世 0433271746 DLLA150S1066 燃油噴油嘴 - Image 3
1 / 3

博世 0433271746 DLLA150S1066 燃油噴油嘴


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
噴嘴型別Hole-Type (DLLA)
噴霧角度150 Degrees
孔數3
孔徑0.34 mm
針型S-Type (Short)
開啟壓力225 bar
博世沖壓編號0433271746
噴油器元件參考KBEL90S48 / KBEL90S15/13
材質High-Grade Alloy Steel (Heat Treated)
燃油型別Diesel
淨重0.06 kg
包裝尺寸10 × 5 × 3 cm

製造號

  • DLLA150S1066
  • 0433271746
  • 0 433 271 746

主機廠號

  • 0433271746

發動機號

  • Steyr WD 611.85
  • Steyr WD 311.44
  • Steyr WD 612

互換號

  • Bascolin DLLA150S1066
  • KBEL90S48
  • KBEL90S15/13

適配車型

  • Steyr 91 Series Trucks
  • Case IH Tractors (Steyr Engine)
  • Marshall Tractors (Steyr Engine)
The DLLA150S1066 is a hole-type diesel fuel injector nozzle manufactured to Bosch OEM standards (part number 0433271746). It features a 3-hole spray pattern with 0.34 mm hole diameter and a 150-degree spray angle. The nozzle utilizes an S-type needle valve design for precise fuel metering in high-pressure injection systems. This component serves as a critical wear part within the KBEL90S48/TR injector assembly, commonly fitted to Steyr WD 611.85 diesel engines rated at 73 kW. It is designed for conventional pump-line-nozzle (PLN) systems operating at an opening pressure of approximately 225 bar. The nozzle body is constructed from high-grade alloy steel, heat-treated for wear resistance and dimensional stability under cyclic thermal and hydraulic loads. Cross-reference interchangeability includes Bascolin DLLA150S1066 and various aftermarket equivalents. Verification of the injector assembly number (KBEL90S15/13) and engine application (Steyr WD 611.85, WD 311.44) is required prior to installation. This part is non-returnable once the protective seal is broken due to calibration sensitivity.