XZR8® 鑫眾潤
油研 DSG-03-3C60-A240-N1-50 電磁換向閥
油研 DSG-03-3C60-A240-N1-50 電磁換向閥 - Image 2
油研 DSG-03-3C60-A240-N1-50 電磁換向閥 - Image 3
1 / 3

油研 DSG-03-3C60-A240-N1-50 電磁換向閥


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
製造商Yuken Kogyo Co., Ltd.
型號編號DSG-03-3C60-A240-N1-50
閥型別Solenoid Operated Directional Control Valve
安裝標準ISO 4401-05-04-0-94 (CETOP 5 / D05 / NG10)
滾筒配置3-Position, 4-Way, Type 60 (P-T Center, A-B Blocked)
電磁閥電壓240V AC (50/60 Hz)
Coil ConnectorDIN 43650 Form A
最大工作壓力31.5 MPa (4568 psi)
Max Operating Pressure T21 MPa (3045 psi)
最大流量120 L/min (31.7 GPM)
機體材料Aluminum Alloy
工作溫度範圍-15°C to 60°C
粘度範圍15-400 mm²/s (cSt)
防護等級IP65 (with connector)
絕緣等級Class H
Mounting Bolts4 × M8 × 38 mm (Socket Head Cap Screws)
Sub Plate ReferenceDSGM-03-4002
設計系列50
重量1.0 kg
包裝尺寸18 × 12 × 10 cm

製造號

  • DSG-03-3C60-A240-N1-50

互換號

  • DSG-03-3C60-D24-N1-51
  • DSG-03-3C60-A120-N1-51
  • DSG-03-3C60-R220-N1-51
  • DSG-03-3C60-D12-N1-51
  • D05 Footprint Valve

適配車型

  • Hydraulic Excavators
  • Wheel Loaders
  • Bulldozers
  • Forklifts
  • Industrial Hydraulic Power Units
  • Mobile Construction Machinery
The Yuken DSG-03-3C60-A240-N1-50 is a solenoid-operated directional control valve conforming to ISO 4401-05 (CETOP 5 / D05 / NG10) mounting interface. It features a 3-position, 4-way spool type 60 configuration where pressure port P connects to tank port T in the center position with ports A and B blocked. The valve operates on 240V AC (50/60 Hz) solenoid actuation with DIN 43650 connector. Maximum operating pressure is 31.5 MPa (4568 psi) for ports P, A, and B, with 21 MPa (3045 psi) for port T. Maximum flow capacity reaches 120 L/min (31.7 GPM). The valve body is manufactured from high-strength aluminum alloy with precision-ground spool for minimal internal leakage. Operating temperature range spans -15°C to 60°C with recommended fluid viscosity of 15-400 mm²/s. Standard sub-plate DSGM-03-4002 with M8×38 mounting bolts is required for installation. Coil insulation class H provides IP65 protection when properly connected. Changeover time varies with oil viscosity, spool type, and hydraulic circuit conditions.