XZR8® 鑫眾潤
約翰迪爾 GX20072 割草機底盤傳動皮帶
約翰迪爾 GX20072 割草機底盤傳動皮帶 - Image 2
約翰迪爾 GX20072 割草機底盤傳動皮帶 - Image 3
約翰迪爾 GX20072 割草機底盤傳動皮帶 - Image 4
1 / 4

約翰迪爾 GX20072 割草機底盤傳動皮帶


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
有效長度2635 mm (103.7 in)
頂部寬度12.7 mm (1/2 in)
厚度9.2 mm (0.363 in)
皮帶型別HA Section Flat Belt
建築Wrapped, Aramid (Kevlar) Cord
覆蓋材料Fabric, White
應用領域Mower Deck Drive, 42-inch Deck
重量0.28 kg
包裝尺寸30 × 30 × 5 cm

製造號

  • GX20072
  • A-GX20072
  • GX20072DC

主機廠號

  • GX20072
  • GY20570
  • UC32283
  • UC32283R

互換號

  • SPM215471655
  • 75-919
  • 265-826
  • B1JD90
  • AM137328
  • AM137333
  • AM141033
  • GY20570DC

適配車型

  • John Deere D100
  • John Deere D105
  • John Deere D110
  • John Deere D120
  • John Deere D130
  • John Deere E100
  • John Deere E110
  • John Deere E120
  • John Deere E130
  • John Deere L100
  • John Deere L108
  • John Deere L110
  • John Deere L111
  • John Deere L118
  • John Deere L120
  • John Deere L130
  • John Deere LA100
  • John Deere LA105
  • John Deere LA110
  • John Deere LA115
  • John Deere LA120
  • John Deere LA125
  • John Deere LA135
  • John Deere X105
  • John Deere X125
  • John Deere X145
  • John Deere 100 Series
  • John Deere S100
  • John Deere S110
  • John Deere S200 Series
  • Scotts L17.542
  • Scotts L1742
  • Sabre 14.542GS
  • Sabre 17.542HS
The John Deere GX20072 is a HA-section flat mower deck drive belt designed for 42-inch cutting decks on 100, D100, E100, L100, LA100, X100, and S200 series lawn tractors. It features wrapped construction with aramid (Kevlar) tensile cords for high tensile strength, heat resistance, and reduced stretch under heavy load. The belt transmits power from the engine PTO to the mower deck spindle assembly, ensuring consistent blade tip speed and cut quality. Effective length is 2635 mm (103.7 inches) with a top width of 12.7 mm (1/2 inch) and thickness of 9.2 mm (0.363 inch). The white fabric cover reduces pulley wear and minimizes belt rollover. This part supersedes earlier part numbers GY20570 and UC32283. Cross-references include Oregon 75-919, Stens 265-826, Sunbelt B1JD90, and Craftsman SPM215471655. Installation requires proper tensioning per operator manual; inspect idler pulleys and spindle bearings for wear during replacement to maximize service life.