XZR8® 鑫眾潤
中國重汽 HG1500110361 渦輪增壓器進油管總成

中國重汽 HG1500110361 渦輪增壓器進油管總成


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
零件名稱Turbocharger Oil Feed Line / Inlet Pipe
系統Engine Lubrication / Turbocharger
材質High-Temperature Steel Alloy
連線型別Flared / Banjo Fittings
螺紋規格M14x1.5 / M16x1.5 (Typical)
最大工作溫度150 °C
最大工作壓力1.0 MPa
表面處理Zinc Plating / Passivation
淨重0.85 kg
包裝尺寸65 × 10 × 5 cm

製造號

  • HG1500110361

主機廠號

  • HG1500110361
  • 612630060086

發動機號

  • Weichai WD615
  • Sinotruk WD618
  • MAN D2066

適配車型

  • Sinotruk Howo 371
  • Sinotruk Howo 420
  • Sinotruk Sitrak C7H
  • Sinotruk Hohan N7
The HG1500110361 turbocharger oil feed line is a critical component within the engine lubrication system, designed to supply pressurized engine oil to the turbocharger bearing cartridge. It is engineered for Sinotruk Howo series heavy-duty trucks equipped with WD615 and WD618 diesel engines. The assembly consists of a high-temperature resistant steel tube with precision-formed bends and OEM-specification end fittings, typically flared or banjo-type connections, to ensure leak-free sealing under dynamic engine vibration and thermal cycling. Constructed from carbon steel or stainless steel with corrosion-resistant surface treatment, the line withstands operating temperatures up to 150°C and engine oil pressures exceeding 0.8 MPa. Dimensional accuracy of the tube routing and fitting thread profiles (commonly M14x1.5 or M16x1.5) is maintained to OEM standards for direct installation without modification. This part replaces the original factory line to restore proper turbocharger lubrication and prevent bearing failure due to oil starvation.