XZR8® 鑫眾潤
海德馬克 HGP-33A-F6-6R 雙聯齒輪泵
海德馬克 HGP-33A-F6-6R 雙聯齒輪泵 - Image 2
1 / 2

海德馬克 HGP-33A-F6-6R 雙聯齒輪泵


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
泵型別Tandem Double Gear Pump
前發動機排量6 cc/rev
後置排量6 cc/rev
總排量12 cc/rev
最大持續壓力210 bar (3000 psi)
最大峰值壓力250 bar (3600 psi)
額定速度1800 rpm
安裝法蘭SAE 2-Bolt
軸徑17.46 mm (0.6875 in)
軸型別Keyed
進氣口ZG 3/4 in (BSPP)
出口埠ZG 1/2 in (BSPP) x 2
旋轉方向Clockwise (Viewed from Shaft End)
外殼材料High-Strength Aluminum Alloy
齒輪材料Alloy Steel, Hardened
密封材料Viton (FKM)
軸承型別Oilless Composite Bearings
重量5.5 kg
包裝尺寸28 × 16 × 14 cm

製造號

  • HGP-33A-F6-6R
  • HGP-33A-F6/6R
  • HGP33AF66R

互換號

  • HGP-33A-F6-6R
  • HGP-33A-F6/6R
  • HGP33AF66R
  • HGP-33A-F6R
  • HGP-33A-F6R+HGP-33A-F6R

適配車型

  • Industrial Hydraulic Power Units
  • Agricultural Machinery
  • Construction Equipment
  • Mini Excavators
  • Skid Steer Loaders
  • Log Splitters
  • Material Handling Equipment
The HGP-33A-F6-6R is a tandem double gear pump featuring two 6 cc/rev displacement sections in a single housing. It utilizes high-strength aluminum alloy casing with precision-machined alloy steel gears for high volumetric efficiency and low noise operation. The pump is rated for continuous operating pressure of 210 bar (3000 psi) with peak pressure capability of 250 bar (3600 psi). Maximum rated speed is 1800 rpm. Mounting configuration follows SAE 2-bolt flange standard with a 17.46 mm (0.6875 in) diameter keyed shaft extension. Inlet port is ZG 3/4 inch (BSPP) and outlet ports are ZG 1/2 inch (BSPP) for each stage. The unit incorporates high-temperature Viton seals and oilless bearings for extended service life in demanding hydraulic circuits. Weight is approximately 5.5 kg. Suitable for medium-duty industrial, agricultural, and construction machinery hydraulic systems requiring dual independent flow circuits.