XZR8® 鑫眾潤
帶有鎖塊和單向閥的二類液壓拉桿
帶有鎖塊和單向閥的二類液壓拉桿 - Image 2
1 / 2

帶有鎖塊和單向閥的二類液壓拉桿


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
拖鉤類別Category 2 (Cat 2)
縮回長度22 in (559 mm)
延伸長度33 in (838 mm)
衝程11 in (279 mm)
汽缸缸徑3-1/8 in (80 mm)
杆徑1-9/16 in (40 mm)
銷直徑1 in (25.4 mm)
球頭寬度2 in (50.8 mm)
埠尺寸G3/8 (3/8 in BSP)
最大工作壓力20 MPa (2900 PSI)
2175psi推力17,100 lbs
2175psi拉力12,900 lbs
軟管長度30.1 in (765 mm)
檢查閥型別Bidirectional Pilot-Operated with Locking Block
氣缸結構Welded Double-Acting
材質45# Steel, Hard Chrome-Plated Rod
表面處理Black Powder Coat
淨重18 kg
This Category 2 hydraulic top link replaces the standard mechanical top link on agricultural tractors, enabling precise implement angle adjustment from the operator seat. The double-acting cylinder features an integrated locking block with a bidirectional pilot-operated check valve that prevents cylinder drift and maintains position under load when the hydraulic pump is inactive. The assembly includes two hydraulic hoses with G3/8 (3/8 inch BSP) swivel fittings for direct connection to the tractor's double-acting remote valve. Constructed from high-strength 45# steel with a corrosion-resistant black powder-coated finish, the cylinder bore measures 3-1/8 inches (80 mm) with a 1-9/16 inch (40 mm) diameter hard chrome-plated rod. The unit provides a retracted length of 22 inches (559 mm) and extends to 33 inches (838 mm), delivering an 11-inch (279 mm) stroke. Both ends are equipped with 1-inch (25.4 mm) diameter pin holes and 2-inch (50.8 mm) wide ball sockets compatible with standard Category 2 three-point hitch linkages. Rated for a maximum working pressure of 20 MPa (2900 PSI), the cylinder generates approximately 17,100 lbs push force and 12,900 lbs pull force at 2,175 PSI system pressure.