XZR8® 鑫眾潤
科瑪普 I-CR-R CAN匯流排冗餘模組
科瑪普 I-CR-R CAN匯流排冗餘模組 - Image 2
1 / 2

科瑪普 I-CR-R CAN匯流排冗餘模組


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
功能CAN2 Bus Redundancy
最大控制器數量20
冗餘介面RS485
主匯流排CAN (CAN2)
供電電壓8-36 VDC
安裝型別DIN Rail
工作溫度範圍-20 to +70 °C
防護等級IP20
淨重0.35 kg
包裝尺寸12 × 9 × 6 cm

製造號

  • I-CR-R
  • ICRR

適配車型

  • ComAp InteliGen NT
  • ComAp InteliMains NT
  • ComAp InteliSys NTC BaseBox
  • ComAp InteliGen4
  • ComAp InteliDrive DCU Marine
  • ComAp InteliNeo 6000
The ComAp I-CR-R is a CAN bus redundancy module designed to provide high-reliability inter-controller communication for ComAp generator and mains controllers. It creates a redundant CAN2 bus path using a parallel RS485 connection, ensuring communication continuity in applications with large physical distances between controllers or where the primary CAN bus is at risk of interruption. The module supports a maximum of 20 controllers on the CAN2 bus. It is compatible with ComAp InteliGen NT, InteliMains NT, InteliSys NTC BaseBox, InteliGen4, InteliDrive DCU Marine, and InteliNeo 6000 series controllers. The hardware is based on the I-CB/CAT GAS platform with dedicated I-CR-R firmware. Configuration jumpers and diagnostic LEDs provide status indication for local and redundant bus health. Power supply range is 8-36 VDC. The unit is designed for DIN-rail mounting inside control panels.