


1 / 3
ComAp IG-NTC-BB InteliGen NTC BaseBox 控制器
極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
| 額定電壓 | 8-36 VDC |
|---|---|
| 工作溫度範圍 | -20 to +70 °C |
| 安裝配置 | DIN Rail / Door Mount (with InteliVision 5/8) |
| 通訊介面 | RS485, Ethernet (Modbus TCP), USB, CAN |
| 顯示 | Detachable Colour Display (InteliVision 5/8) |
| 最大並行單元 | 32 |
| 防護等級 | IP20 (controller), IP65 (display front) |
| 尺寸寬度高度深度 | 220 x 165 x 65 mm |
| 重量 | 1.5 kg |
製造號
- IG-NTC-BB
- IG-NTC-BB 400HZ
互換號
- IG-NTC-BB
- IGNTCBB
The ComAp InteliGen NTC BaseBox (order code IG-NTC-BB) is a comprehensive paralleling generator set controller designed for single or multiple diesel gen-sets operating in standby or parallel mode. It supports complex systems including combined heat and power (CHP) and gas engine control. The controller features true RMS measurement for voltage, current, and power, a built-in PLC interpreter for customizable logic, and a detachable colour display (InteliVision 5 or 8) for local visualization. It provides advanced power management functions such as synchronisation, active and reactive load sharing, AMF mains failure, baseload, and peak shaving. Communication capabilities include RS485, Ethernet with Modbus TCP, USB, CAN bus, and support for remote monitoring via AirGate and WebSupervisor. The unit is DIN-rail mountable and suitable for switchgear applications in critical infrastructure such as data centres, hospitals, and banks. This controller has been succeeded by the InteliGen 1000 series but remains in service for existing installations.
同系技術配件與配套推薦

ComAp CM2IB4GABFB InternetBridge-NT 4G 通訊模組
CM2IB4GABFBComap

ComAp InteliLite 電信發電機控制器
InteliLite TelecomComap

開普 KI-MB (ATS)-D2-1/G 發電機控制屏總成
KI-MB (ATS)-D2-1/GKipor

Hayward LC250A 鹽氯發生器總成
LC250AHayward

開普 KI-MB3-D1-1G 發電機控制屏總成
KI-MB3-D1-1/GKipor

開普 DU30 逆變器模組總成
XZR8Aftermarket

智光 HGM4020N AMF 發電機控制器
HGM4020NSmart

深海電子 DSE8610 MKII 並機控制模組
DSE8610Deep Sea Electronics
