XZR8® 鑫眾潤
川崎 K5V140DTP-9N01 主液壓泵總成
川崎 K5V140DTP-9N01 主液壓泵總成 - Image 2
1 / 2

川崎 K5V140DTP-9N01 主液壓泵總成


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
排量140 cm³/rev (per section)
額定壓力34.3 MPa (343 bar)
峰值壓力39.2 MPa (392 bar)
泵型別Variable Displacement Axial Piston Pump (Swash Plate)
配置Tandem (Dual Section)
控制方式Pressure Compensator, Flow Control, Power Control (Electro-Hydraulic Optional)
轉速Bi-Rotation (CW/CCW per section specification)
安裝法蘭SAE 4-Bolt (Typical for K5V140)
輸出軸型別Splined (17 Tooth per 9N01 spec)
埠尺寸SAE 1-1/4 in (6000 psi Flange)
進口埠尺寸SAE 2-1/2 in (3000 psi Flange)
殼體排油口SAE -12 ORB
淨重95 kg

製造號

  • K5V140DTP-9N01
  • K5V140DTP

主機廠號

  • K1006550C
  • 400914-00394B
  • 400914-00393A
  • K1029736
  • 708-2L-00112
  • VOE14521441
  • 14575661
  • 60017767
  • 72208819
  • K1006550
  • K1006550A

互換號

  • 401 00424C
  • 31N8-10010
  • 31N8-10011
  • YNF18963

適配車型

  • Doosan DX300-7
  • Doosan DH300-7
  • Daewoo Solar 300LC-V
  • Daewoo Solar 300LC-7A
  • Komatsu PC300-8
  • Kobelco SK330-6E
  • Kobelco SK350-8
  • Sany SY285
  • Sany SY305
  • Sany SY380-8
  • Hyundai R305-9
  • Volvo EC240
  • Volvo EC300
  • Hitachi ZX300-3
The Kawasaki K5V140DTP-9N01 is a high-performance tandem axial piston pump utilizing a swash plate design for variable displacement control. It features a nominal displacement of 140 cm³/rev per section, delivering a combined flow capacity suitable for 30-ton class hydraulic excavators. The pump is rated for a continuous operating pressure of 34.3 MPa (343 bar) with a peak pressure capability of 39.2 MPa (392 bar). This unit serves as a direct replacement for main hydraulic systems in crawler excavators requiring twin-pump configuration for independent travel and implement circuits. The 9N01 designation identifies the specific regulator, shaft, and porting configuration calibrated for Doosan DX300-7 and Daewoo Solar 300LC-V platforms. It incorporates pressure compensation, flow control, and power limitation control options. The pump housing is constructed from high-strength cast iron with hardened steel rotating group components including cylinder block, pistons, and valve plate, ensuring durability under high-cycle construction machinery duty cycles. OEM cross-references include Doosan K1006550C, 400914-00394B, and 400914-00393A; Komatsu 708-2L-00112; Volvo VOE14521441; Sany 60017767; and New Holland 72208819. Compatible with aftermarket repair kits covering cylinder block, valve plate, seal kits, and rotary group assemblies.