XZR8® 鑫眾潤
Kato Engineering K65-12B VR6 自動電壓調節器總成
Kato Engineering K65-12B VR6 自動電壓調節器總成 - Image 2
Kato Engineering K65-12B VR6 自動電壓調節器總成 - Image 3
Kato Engineering K65-12B VR6 自動電壓調節器總成 - Image 4
Kato Engineering K65-12B VR6 自動電壓調節器總成 - Image 5
1 / 5

Kato Engineering K65-12B VR6 自動電壓調節器總成


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
調節器型別Half-Wave Phase-Controlled Thyristor AVR
激磁型別Brushless Generator
連續工作電流12 Adc @ 65 Vdc
輸出電流 125 Adc @ 125 Vdc for 10 Seconds
額定輸入電壓63 to 105 Vac
輸入頻率1 or 2 V/Hz Jumper Selectable
最大排量1092 VA Continuous
參考電壓±1% for 40°C Temperature Change
電機頻率45 to 65 Hz
響應時間< 4 Milliseconds
延時保護Inverse Time Shutdown
電源Shunt or PMG (Permanent Magnet Generator)
外殼材料Encapsulated Plastic Case
淨重1.47 kg
包裝尺寸16.3 × 11 × 21.3 cm

製造號

  • K65-12B
  • VR6
  • K125-10B
  • 810-35334-00

主機廠號

  • K65-12B
  • VR6
  • 365-2076
  • 9Y8400

發動機號

  • Caterpillar 3412C
  • Caterpillar 3306
  • Caterpillar 3306B
  • Caterpillar C9
  • Caterpillar 3456
  • Caterpillar C18
  • Caterpillar C15
  • Caterpillar 3406C

互換號

  • K125-10B
  • VR6-A

適配車型

  • Caterpillar Industrial Generator Sets
The K65-12B (VR6) is a half-wave phase-controlled thyristor type automatic voltage regulator forming part of the excitation system for brushless generators. It is contained in an encapsulated plastic case for environmental protection. The regulator controls DC exciter field power for conventional 50, 60, or 400 Hz generators. It supports both shunt and permanent magnet generator (PMG) power input configurations. Key features include frequency compensation with selectable slope, inverse time over-excitation shutdown, solid-state circuitry, and single-phase or three-phase voltage sensing. The unit provides 12 Adc at 65 Vdc maximum continuous output and 25 Adc at 125 Vdc forcing for 10 seconds. Regulation accuracy is maintained within ±1% for a 40°C temperature change. V/Hz ratio is jumper selectable (1 or 2) with knee frequency adjustable from 45 Hz to 65 Hz. Regulator response time is less than 4 milliseconds.