
川崎 LL00090 液壓泵調節器總成
極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
| 調節器型別 | Load-Sensing Control Valve |
|---|---|
| 相容泵系列 | Kawasaki K3V63DTP |
| 最大工作壓力 | 35 MPa |
| 控制方式 | Hydraulic Pilot Pressure |
| 帶電磁閥 | No |
| 外殼材料 | Cast Iron |
| 捲筒材料 | Hardened Steel |
| 安裝配置 | Flange Mount on Pump Control Cover |
| 淨重 | 2.8 kg |
| 包裝尺寸 | 18 × 12 × 10 cm |
製造號
- LL00090
- LL00089
適配車型
- Case CX130
- Case CX135SR
- Case CX160
The Kawasaki LL00090 regulator is a load-sensing control valve designed for the K3V63DTP series tandem axial piston hydraulic pumps. This component modulates pump displacement in response to system load pressure, maintaining optimal hydraulic flow and pressure for excavator functions including boom, arm, swing, and travel circuits.
Constructed with hardened steel spool and cast iron housing, the regulator features precision-machined control lands and feedback linkage for accurate pressure compensation. It operates at system pressures up to 35 MPa (350 bar) with pilot pressure modulation. The unit is a direct replacement for the non-solenoid regulator variant used on Case CX130, CX135SR, and CX160 excavators equipped with Kawasaki K3V63DTP main pumps.
Installation requires proper torque on mounting bolts and hydraulic line connections per OEM service manual. System contamination control is critical; flush hydraulic circuit and replace filters during regulator replacement to prevent premature wear.
同系技術配件與配套推薦

川崎 702-16-03910 液壓操縱桿先導閥
702-16-03910Kawasaki

美國太陽液壓 CBEG-LIN 平衡閥插裝件
CBEG-LINSun Hydraulics

適配後市場 702-16-01180 腳踏先導閥總成
702-16-01180Aftermarket

Festo GRO-QS-10 流量控制節流閥
GRO-QS-10Festo

小松 702-16-05060 先導閥總成
702-16-05060Komatsu

洋馬 172463-74511 遠端控制閥總成
172463-74511Yanmar

日產 92400-ZW10A 暖風控制閥總成
92400-ZW10ANissan

大起 36001-0140 操縱桿閥選擇器球頭螺栓元件
36001-0140Kioti
