XZR8® 鑫眾潤
MSB MS500 液壓破碎錘密封件套裝
MSB MS500 液壓破碎錘密封件套裝 - Image 2
1 / 2

MSB MS500 液壓破碎錘密封件套裝


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
套件型別Hydraulic Breaker Seal Kit
斷路器型號MS500
相容系列SAGA500
材質NBR, PTFE, Polyurethane (PU)
工作壓力Up to 20 MPa
工作溫度範圍-30°C to 120°C
ComponentsPiston Seals, Rod Seals, Buffer Seals, Wiper Seals, O-Rings, Backup Rings
淨重3.5 kg
包裝尺寸35 × 25 × 15 cm

製造號

  • MS500
  • MSB-MS500
  • MS 500

互換號

  • SAGA500
  • SAGA 500

適配車型

  • Kubota Excavators
  • Caterpillar Excavators
  • Hitachi Excavators
  • Komatsu Excavators
  • John Deere Excavators
The MSB MS500 hydraulic breaker seal kit is engineered for the MS500 and SAGA500 series rock breakers. It contains a complete set of dynamic and static seals required for cylinder rebuilds, including piston seals, rod seals, buffer seals, wiper seals, O-rings, and backup rings. Manufactured from high-grade nitrile rubber (NBR), polytetrafluoroethylene (PTFE), and polyurethane (PU) compounds to withstand high-pressure hydraulic oil environments and extreme impact loads typical in demolition and quarry applications. This kit restores hydraulic cylinder sealing performance, preventing oil leakage and maintaining optimal nitrogen gas pressure in the accumulator. It is designed as a direct replacement for MSB MS500 breaker models mounted on carrier excavators from major OEMs. Regular replacement every 500 to 800 operating hours is recommended to protect the piston and cylinder bore from scoring caused by contaminated oil or worn seal lips.