XZR8® 鑫眾潤
GAC MSP6731 磁性轉速感測器
GAC MSP6731 磁性轉速感測器 - Image 2
GAC MSP6731 磁性轉速感測器 - Image 3
GAC MSP6731 磁性轉速感測器 - Image 4
1 / 4

GAC MSP6731 磁性轉速感測器


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
螺紋尺寸3/8-24 UNF-2A
螺紋長度102 mm (4 in)
線纜長度1.8 m (6 ft)
電纜型別Shielded, Flying Leads
機體材料Stainless Steel
封裝型別Epoxy
電感142 mH ±25%
電阻300 Ω MAX
輸出型別AC Voltage
怠速輸出1.5 V AC Minimum
最大輸出30 V AC
工作溫度範圍-40°C to +105°C (-40°F to +221°F)
空氣間隙至齒距0.64-0.89 mm
訊號頻率Proportional to Engine Speed (Teeth per Second Hz)
需要激勵電路No
控制器相容性All GAC Electronic Speed Controllers
危險區域Available (Not Certified)
淨重0.12 kg

製造號

  • MSP6731

互換號

  • MSP6730
  • 212061
  • 212211
The GAC MSP6731 is a magnetic pickup sensor (MPU) designed to detect engine speed by sensing the passing of flywheel teeth. It provides a precise AC voltage signal proportional to engine RPM for governors and electronic speed control units. The sensor features a rugged stainless steel construction with epoxy encapsulation, resistant to dust, dirt, and high temperatures. It requires no external energizing circuit and is compatible with all GAC electronic speed controllers. Key specifications include a 3/8-24 UNF-2A thread, 4 in (102 mm) thread length, and 6 ft (1.8 m) shielded cable with flying leads. Electrical characteristics: inductance 142 mH ±25%, resistance 300 Ω max, idle output 1.5 V AC minimum, maximum output 30 V AC. Operating temperature range is -40°C to +105°C (-40°F to +221°F). Installation air gap (off-tooth distance) is 0.64-0.89 mm. Suitable for hazardous location installation (not certified).