XZR8® 鑫眾潤
丹佛斯 151H1084 OMH400 液壓擺線馬達
丹佛斯 151H1084 OMH400 液壓擺線馬達 - Image 2
1 / 2

丹佛斯 151H1084 OMH400 液壓擺線馬達


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
排量396.8 cm³/rev
推薦排量400 cc/rev
最大連續速度185 rpm
最大轉速限制225 rpm
最大扭矩840 Nm
峰值扭矩980 Nm
最大持續壓力275 bar
最大峰值壓力295 bar
最大流量75 L/min
安裝法蘭A4 (4-hole magneto, 82.5 mm centering)
輸出軸型別1-inch SAE 6B splined (14T, 31.75 mm)
攻絲孔徑1/4-20 UNC
埠配置G1/2 BSPP side ports
油排放口G1/4 BSPP
閥型別Integrated spool valve
齒輪配置Gerotor with rollers
旋轉方向Bi-directional
重量(kg)12.3 kg

製造號

  • 151H1084
  • 151H-1084
  • OMH400-151H-1084
  • OMH400151H1084
  • OMH-400-151H-1084

主機廠號

  • 151H1084

互換號

  • 104-3699-006
  • S.137222
  • DAN-151H1084
  • 61258-000
The Danfoss OMH400 orbital motor (model code 151H1084) is a low-speed high-torque (LSHT) gerotor-type hydraulic motor designed for medium-duty applications requiring high torque output at low rotational speeds. The motor features a geometric displacement of 396.8 cm³/rev (400 cc nominal) with a maximum continuous speed of 185 rpm and intermittent speed of 225 rpm. Continuous torque rating is 840 Nm with intermittent peak torque of 980 Nm. Maximum continuous operating pressure is 275 bar (3,990 psi) with peak pressure capability of 295 bar. Maximum continuous flow rating is 75 L/min. The 151H1084 variant incorporates an A4 mounting flange (4-hole magneto type with 82.5 mm centering diameter and 106.4 mm bolt circle) and a 1-inch SAE 6B splined output shaft (14 teeth, 31.75 mm major diameter) with 1/4-20 UNC tap. Port configuration consists of side-mounted G1/2 BSPP main ports and a G1/4 BSPP drain port. The motor utilizes an integrated spool valve design with gear rim roller set for high volumetric and mechanical efficiency. Approximate unit weight is 12.3 kg. Manufactured by White Drive Motors (former Sauer Danfoss) in Poland.