

1 / 2
HydraForce PR08-32A-0-N-12 減壓溢流閥
極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
| 閥型別 | Pressure Reducing/Relieving, Direct Acting, Spool Type |
|---|---|
| 型腔 | C-08-3 |
| 最大工作壓力 | 350 bar (5000 psi) |
| 最大流量 | 11.4 L/min (3 GPM) |
| 彈簧範圍程式碼 | 12 (approx. 100-1200 psi / 7-83 bar) |
| 埠配置 | 3-Way (Port 1 Reduced Pressure, Port 2 Inlet, Port 3 Tank/Drain) |
| 導輪型別 | Internal |
| 排水型別 | Internal Spring Chamber Drain to Port 3 |
| 調整型別 | Internal Hex Screw |
| 密封材料 | Nitrile (Buna-N) |
| 安裝扭矩 | 30-35 Nm (22-26 ft-lbs) |
| 重量 | 0.18 kg (0.4 lbs) |
| 包裝尺寸 | 8 × 5 × 5 cm |
製造號
- PR08-32A-0-N-12
- PR0832A0N12
The HydraForce PR08-32A-0-N-12 is a screw-in, cartridge-style, direct-acting, spool-type hydraulic pressure reducing/relieving valve.
It features an internal pilot and internal spring chamber drain to port 3. The valve is designed to act as a pressure regulating device for secondary circuits in mobile and industrial hydraulic systems.
It is intended for use in stable input flow circuits. In its steady state, the valve allows flow bidirectionally from port 2 to port 1, with the spring chamber constantly drained at port 3.
On attainment of a predetermined pressure at port 1, the cartridge shifts to block flow at port 2, thereby regulating pressure at port 1. In this mode, the valve also relieves port 1 to port 3 at a variable value over the set reducing pressure.
The valve fits the industry standard C-08-3 cavity. Adjustment type is internal hex screw (code A). Seal material is Nitrile (code 0). No body included (cartridge only, code N). Spring range code 12 typically corresponds to a 100-1200 psi (7-83 bar) adjustment range.
同系技術配件與配套推薦

HydraForce TS10-36A 比例減壓溢流閥
TS10-36AHydraforce

HydraForce RV10-20H-0-N-33/27 平衡閥插裝件
RV10-20H-0-N-33/27Hydraforce

HydraForce PS08-32A-0-N-13 順序閥
PS08-32A-0-N-13Hydraforce

小松 723-40-70100 減壓閥塊總成
723-40-70100Komatsu

阿特拉斯·科普柯 1626105282 壓力調節閥
1626105282Atlas Copco

小松 708-2L-03234 伺服閥總成
708-2L-03234Komatsu

英格索蘭 39724414 調節閥
39724414Ingersoll Rand

壽力 88290001-135 調節閥
88290001-135Sullair
