
派克 PVT38 液壓泵大修包
極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
| Applicable Pump Series | Parker Denison PVT38 |
|---|---|
| 泵型別 | Variable Displacement Axial Piston |
| 標稱排量 | 38 cc/rev |
| 額定壓力 | 280 bar (4060 psi) |
| 峰值壓力 | 350 bar (5075 psi) |
| 安裝標準 | SAE B / SAE C 2-Bolt Flange |
| 軸配置 | SAE Spline / Keyed Options |
| 轉速 | Clockwise / Counterclockwise |
| 支援的控制系統型別 | Pressure Compensator, Load Sensing |
| 液壓油相容性 | Mineral Oil (HL, HLP), Biodegradable Esters |
| 工作溫度範圍 | -20°C to +90°C (-4°F to +194°F) |
| 套件內容 | Shaft Seal, Gaskets, O-Rings, Bearings, Piston Shoes, Valve Plate Seals |
| 淨重 | 6.5 kg |
| 包裝尺寸 | 40 × 30 × 20 cm |
製造號
- PVT38
- PVT38/64
This overhaul kit is engineered for the Parker Denison PVT38 series variable displacement axial piston hydraulic pumps. The kit contains all necessary soft parts and wear components required for a complete pump rebuild, including high-pressure shaft seals, port plate gaskets, bearing sets, piston shoes, and valve plate interface seals. Components are manufactured to meet original equipment dimensional tolerances and material specifications for hydraulic fluid compatibility.
The PVT38 pump series features a nominal displacement of 38 cc/rev and operates at rated pressures up to 280 bar with peak pressures of 350 bar. This kit restores internal sealing integrity and mechanical clearances to factory standards, ensuring reliable hydraulic output and efficiency in demanding mobile and industrial applications. Compatible with both new type and legacy PVT38/64 frame size pumps.








