



1 / 4
久保田 RB511-21702 下支重輪總成
極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
| 材質 | 40Mn2 Alloy Steel / 45# Carbon Steel |
|---|---|
| 表面硬度 | HRC 52-58 |
| 硬度 | HRC 25-30 |
| 軸承型別 | Sealed Tapered Roller Bearings |
| 潤滑型別 | Oil-Filled Lifetime Lubrication |
| 密封型別 | Heavy Duty Floating Seals |
| 安裝螺栓扭矩 | 103-118 N·m (10.5-12 kgf·m) |
| 滾輪型別 | Bottom Roller (Lower Roller) |
| 法蘭配置 | Dual Flange (Inner & Outer) |
| 淨重 | 6.5 kg |
| 包裝尺寸 | 25 × 20 × 20 cm |
製造號
- RB511-21702
- RB511-21705
- RB511-221704
主機廠號
- RB511-21702
- RB511-21705
- RB511-221704
發動機號
- Kubota D1503-M-EBH2
適配車型
- Kubota KX91-3A
- Kubota KX91-3
- Kubota KX91-3S
- Kubota KX91-3S2
- Kubota KX71-3
- Kubota U35-3
The RB511-21702 bottom track roller is engineered as a direct replacement for Kubota KX91-3A compact excavators. Constructed from 40Mn2 alloy steel with dual-flange configuration, the roller body undergoes through-hardening to HRC 25-30 core hardness and surface induction hardening to HRC 52-58 for superior abrasion resistance.
The assembly integrates sealed tapered roller bearings lubricated by an oil-filled cavity, maintained by heavy-duty floating seals to exclude contaminants in severe undercarriage environments. Mounting hardware requires tightening torque of 103-118 N·m (10.5-12 kgf·m) per Kubota service specifications.
This component supersedes earlier part numbers RB511-21705 and RB511-221704, ensuring full interchangeability across the KX91-3 series including KX91-3S and KX91-3S2 variants, as well as cross-compatibility with KX71-3 and U35-3 models sharing the same undercarriage architecture.








