XZR8® 鑫眾潤
上柴 S00038979+01 渦輪增壓器進油管總成

上柴 S00038979+01 渦輪增壓器進油管總成


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
零件型別Turbocharger Oil Inlet Pipe Assembly
建築Welded Steel Tubing with Flanged/Banjo Ends
材質High-Temperature Carbon Steel / Stainless Steel
連線型別Flange Mount (Engine Block) / Banjo Bolt (Turbocharger)
工作壓力Engine Oil Pressure (Typical 300-600 kPa)
工作溫度範圍-40°C to +150°C
表面處理Zinc Phosphate / Dacromet Coating
淨重0.85 kg
包裝尺寸40 × 15 × 10 cm

製造號

  • S00038979+01

主機廠號

  • S00038979+01

發動機號

  • Shangchai SC8DK
  • Shangchai SC11CB
  • Shangchai SC12E
  • Shangchai SC13G

適配車型

  • SAIC Hongyan Genlyon
  • SAIC Hongyan Kingkan
  • SAIC Hongyan C100
  • Shanghai Diesel Heavy Duty Trucks
This turbocharger oil inlet pipe assembly is manufactured to OEM specifications for Shangchai diesel engines. It serves as the critical lubrication supply line connecting the engine block oil gallery to the turbocharger bearing housing center section. Constructed from high-temperature resistant carbon steel or stainless steel tubing with precision welded flange connections and banjo fittings. The welded assembly design eliminates potential leak paths associated with clamped hose connections under high thermal cycling conditions. Internal bore dimensions and flow path geometry are engineered to maintain required oil volume and pressure specifications across the engine operating range. Designed for direct replacement fitment on Shangchai SC8DK, SC11CB, SC12E, and SC13G series engines commonly equipped in SAIC Hongyan heavy-duty truck platforms. Installation requires new sealing washers or gaskets at both flange and banjo connection points to ensure leak-free sealing.