
三一 SY60 控制手柄密封件套裝
極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
| 應用領域 | Hydraulic Pilot Control Valve (Joystick) |
|---|---|
| 材質 | NBR (Nitrile Butadiene Rubber) / PTFE / PU |
| 流體相容性 | Mineral Hydraulic Oil ISO VG 32/46/68 |
| 最大先導壓力 | 40 bar (580 psi) |
| 工作溫度範圍 | -30°C to +100°C (-22°F to +212°F) |
| 套件內容 | O-rings, Backup Rings, Dust Seals |
| 淨重 | 0.15 kg |
| 包裝尺寸 | 15 × 10 × 5 cm |
發動機號
- Isuzu 4LE2X
- Kubota V2607
- Yanmar 4TNV98C
適配車型
- Sany SY60C
- Sany SY60U
- Sany SY60Pro
This hydraulic seal kit is engineered for the pilot control valve (joystick) assembly on Sany SY60 series compact excavators. It contains all necessary elastomeric seals, O-rings, and backup rings to rebuild the control lever hydraulic interface, preventing internal leakage and restoring precise pilot pressure modulation. The kit components are manufactured from high-grade NBR (Nitrile Butadiene Rubber) compatible with mineral-based hydraulic fluids (ISO VG 32/46/68). Designed to withstand pilot circuit pressures up to 40 bar (580 psi) and operating temperatures from -30°C to +100°C. Direct replacement for OEM pilot valve seal assemblies used on SY60C, SY60U, and SY60Pro models equipped with ISO pattern hydraulic pilot controls.
Material composition includes NBR 90 durometer O-rings, PTFE backup rings, and polyurethane dust seals where applicable. Installation requires standard hand tools and clean hydraulic assembly practices. Recommended during pilot valve overhaul or when control lever drift and reduced pilot pressure are diagnosed.








