XZR8® 鑫眾潤
CKD SCPD3L-CB1630 氣缸總成
CKD SCPD3L-CB1630 氣缸總成 - Image 2
1 / 2

CKD SCPD3L-CB1630 氣缸總成


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
孔徑尺寸16 mm
衝程長度30 mm
動作型別Double Acting
最大工作壓力1.0 MPa
活塞突出範圍50 to 750 mm/s
緩衝型別Rubber Cushion
安裝樣式Clevis Bracket (CB)
開關配置With Switch (L Series)
工作介質Compressed Air
淨重0.25 kg

製造號

  • SCPD3L-CB1630
  • SCPD3-L-CB-16-30

主機廠號

  • CA42610P00

適配車型

  • Komori GL540
  • Komori Printing Press
The SCPD3L-CB1630 is a pencil-shaped pneumatic cylinder from the CKD SCPD3 series. It features a 16 mm bore diameter and 30 mm stroke length with double-acting operation and rubber cushioning. The cylinder incorporates a magnetic piston for position sensing via the L-series switch mounting capability. Maximum working pressure is rated at 1.0 MPa with a piston speed range of 50 to 750 mm/s. Mounting configuration is clevis bracket (CB) with pin and snap ring included. Operating media is filtered compressed air. This cylinder serves as a direct replacement for the CKD SCPD3L-CB1630 (also designated SCPD3-L-CB-16-30) in industrial automation systems. Primary documented application is the Komori GL540 offset printing press where it functions in press fitting and actuation roles. The unit is manufactured in Japan by CKD Corporation.