XZR8® 鑫眾潤
現代 R80-7 迴轉馬達修理包
現代 R80-7 迴轉馬達修理包 - Image 2
現代 R80-7 迴轉馬達修理包 - Image 3
1 / 3

現代 R80-7 迴轉馬達修理包


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
密封材料NBR / HNBR (Nitrile / Hydrogenated Nitrile)
主密封內徑80 mm ID x 140 mm OD x 5 mm Width
工作壓力35 MPa (5075 PSI)
工作溫度範圍-30°C to +120°C
套件內容Main Seal, O-Rings, Backup Rings, Wear Rings, Dust Seals
淨重1.2 kg
包裝尺寸20 × 15 × 10 cm

製造號

  • K1042873
  • JMF43
  • JMF29
  • 2404-9007

主機廠號

  • 170303-00032

適配車型

  • Hyundai R80-7
  • Hyundai R80-7A
  • Hyundai R80-9
  • Hyundai R80CR-9
  • Doosan DH80
  • Doosan DH80-7
  • Daewoo DH80
This swing motor seal kit is engineered to service the hydraulic swing motors fitted to Hyundai R80 series and Doosan DH80 crawler excavators. The kit addresses the sealing requirements for the Kayaba JMF29 and JMF43 swing motor models, including the reduction gearbox interface. The kit includes main pressure seals, O-rings, backup rings, wear rings, and dust seals manufactured from high-grade NBR and HNBR compounds. These materials provide resistance to hydraulic oil degradation, high pressure extrusion, and temperature extremes typical in construction machinery duty cycles. The main seal dimension of 80 mm inner diameter by 140 mm outer diameter by 5 mm width corresponds to the swing motor main shaft sealing surface. Designed for direct replacement during swing motor overhaul or seal replacement service intervals. Verifies fitment against Hyundai OEM part number 170303-00032 swing motor assembly and Kayaba motor models K1042873, JMF43, JMF29. Installation requires standard hydraulic service tools and cleanliness protocols to prevent contamination.