XZR8® 鑫眾潤
捷豹 T2H39458 變速箱換擋模組總成
捷豹 T2H39458 變速箱換擋模組總成 - Image 2
捷豹 T2H39458 變速箱換擋模組總成 - Image 3
捷豹 T2H39458 變速箱換擋模組總成 - Image 4
1 / 4

捷豹 T2H39458 變速箱換擋模組總成


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
工作電壓12V DC
變速箱型別8-Speed Automatic (ZF 8HP)
Shifter MechanismLever Style (Joystick)
聯結器介面Multi-pin Sealed Electrical Connector
外殼材料Reinforced Polymer with Aluminum Alloy Brackets
Position Sensor TypeHall-Effect
通訊協議CAN Bus
淨重1.8 kg
包裝尺寸35 × 20 × 12 cm

製造號

  • T2H39458
  • T2H39457
  • T2H34570
  • T2H25335
  • JX73-7E453-CB
  • JX737E453CB

主機廠號

  • T2H39458
  • JX73-7E453-CB

發動機號

  • Jaguar 2.0L Ingenium I4 Diesel
  • Jaguar 2.0L Ingenium I4 Petrol
  • Jaguar 3.0L V6 Supercharged Petrol

互換號

  • GJ1310

適配車型

  • Jaguar XE (X760) 2017-2020 (VIN 942528 Onwards)
  • Jaguar XF (X260) 2016-2021
  • Jaguar F-Pace (X761) 2016-2021
The T2H39458 transmission shift module is an electromechanical gear selector assembly designed for Jaguar vehicles equipped with the 8-speed automatic transmission (ZF 8HP). It integrates the shift lever, position sensors, and electronic control interface into a single unit mounted on the center console. This module supersedes earlier part numbers T2H39457, T2H34570, and T2H25335. It features a lever-style (joystick) actuation mechanism as opposed to the rotary dial found on earlier production vehicles. For Jaguar XE models, application is validated for vehicles built from VIN 942528 onwards (approx. 2017 MY onward). The assembly communicates via CAN bus with the transmission control module (TCM) and requires no programming upon installation if replaced with the same part number variant. Construction consists of a reinforced polymer housing with aluminum alloy structural brackets, sealed electrical connectors, and Hall-effect position sensors for precise gear selection detection. Designed for 12V vehicle electrical system operation.