


1 / 3
Mecc Alte T30 旋轉整流橋總成
極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
| 零件型別 | Rotating Bridge Rectifier (Diode Wheel) |
|---|---|
| 相配置 | 3-Phase |
| Diode Configuration | 6 Diodes per Bridge, 3 Bridges per Kit |
| Diode Material | Silicon (Si) |
| Heat Sink Material | Aluminum Alloy |
| Forward Current Rating | Several Hundred Amperes |
| Compatible Alternator Models | ECP28, ECP32, ECP34, ECO38 |
| Generator Set Power Range | 400 kVA - 3000 kVA |
| 輪轂直徑 | 87 mm |
| 套件內容 | 3 Rectifier Bridge Sectors, Varistors |
| 淨重 | 1.5 kg |
| 包裝尺寸 | 15 × 15 × 10 cm |
製造號
- T30
- 6101001200
主機廠號
- 6101001200
互換號
- ZQ50A
- GEDIOT30
適配車型
- Mecc Alte ECP28
- Mecc Alte ECP32
- Mecc Alte ECP34
- Mecc Alte ECO38
The Mecc Alte T30 rotating rectifier bridge assembly functions as the excitation module in brushless synchronous alternators. It converts the AC output from the exciter rotor into DC current to supply the main rotor field winding. The assembly consists of three independent bridge rectifier sectors mounted on an aluminum alloy hub, each sector containing a six-diode silicon configuration rated for several hundred amperes forward current.
This rectifier kit is engineered for direct installation on Mecc Alte alternator models ECP28, ECP32, ECP34, and ECO38, covering a typical generator set power range from 400 kVA to 3000 kVA. The diode wheels are constructed with high-purity silicon junctions to ensure low forward voltage drop and high surge withstand capability under transient loading conditions. The aluminum alloy structure provides thermal dissipation and mechanical stability at operational speeds.
The service kit includes three complete rectifier bridge sectors (often referred to as a 3-piece set) and associated varistors for voltage spike suppression. Installation requires precise torque application on the rotor shaft to maintain dynamic balance. The component serves as a critical wear item in the excitation system, with replacement intervals dictated by operating environment and thermal cycling severity.








