XZR8® 鑫眾潤
General Pump TS2021 三柱塞泵總成
General Pump TS2021 三柱塞泵總成 - Image 2
1 / 2

General Pump TS2021 三柱塞泵總成


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
泵型別Triplex Plunger
系列T Series 47 (T47)
最大工作壓力3500 PSI (241 bar)
額定流量高範圍4.5 GPM (17.0 L/min)
軸徑24 mm (0.945 in)
輸出軸型別Solid, Right Hand (Standard) / Left Hand (TS2021L)
驅動型別Belt Drive / Gearbox / Direct Drive (Electric)
材料成分Nickel-Plated Forged Brass
柱塞材料Ceramic
活塞缸徑20 mm (0.787 in)
衝程16 mm
曲軸箱油容量40.6 oz (1.2 L)
進氣連線1/2"-14 BSP-F
壓力埠3/8"-19 BSP-F
最大工作溫度165°F (74°C)
進氣工作壓力125 PSI (8.6 bar)
馬力評級11.5 bhp
發動機功率17.3 hp
淨重32 lbs (14.5 kg)
包裝尺寸35 × 22 × 22 cm

製造號

  • TS2021
  • TS2021L
  • TS2021GR
  • PMRTS2021
  • TS2021Z
  • TS2021-B

主機廠號

  • 8.702-669.0
  • 8.702-670.0
  • 87026990
  • 87026700
  • 87153370
  • 102115
  • 5-2307
  • 102110
  • 5-2305

發動機號

  • Honda GX690
  • Kohler Command Pro

互換號

  • 102110
  • 5-2305
  • 726490
  • 87026990
  • 8.702-669.0
  • 87026670
  • 102115G
  • 87026700
  • 87153370
  • 8.702-670.0
  • 030-031
  • WS202
  • TSF2021
  • KRK2203

適配車型

  • Kodiak HWBG5230F
  • Landa Pressure Washers
  • BE Power Equipment 85-139-026B
  • Seattle Pump Wall Mount Electric
  • Truck Mount Hot Water Pressure Washers
  • Karcher HDS Series
  • Hotsy Pressure Washers
The General Pump TS2021 is a T Series 47 triplex plunger pump designed for commercial and industrial pressure washing applications. It features a nickel-plated forged brass manifold with an exclusive lifetime warranty, heavy-duty tapered roller bearings, and oversized connecting rods for maximum service life. The pump utilizes a 24 mm solid shaft for belt drive or gearbox configurations, operating at 1450 RPM for 5.6 GPM flow at 3500 PSI, or 1125 RPM for 4.5 GPM flow at 3500 PSI. The die-cast anodized aluminum oil-bath crankcase holds 40.6 ounces of oil to reduce operating temperature and wear. Ceramic plungers (20 mm bore, 16 mm stroke) ensure durability against abrasion and corrosion. Inlet port is 1/2"-14 BSP-F, discharge port is 3/8"-19 BSP-F. Maximum fluid temperature is 165°F (74°C), maximum inlet pressure is 125 PSI. Minimum horsepower requirement is 11.5 brake HP (17.3 HP for gas engines). This pump serves as a direct replacement for Interpump WS202 and is factory-installed on equipment from manufacturers including Karcher, Hotsy, Landa, Kodiak, BE Power Equipment, and Seattle Pump. Common cross-reference part numbers include Karcher 8.702-669.0 and 8.702-670.0, Stens 030-031, and various aftermarket identifiers. Rebuild kits (e.g., KRK2203) are available for seals, valves, and packings.