XZR8® 鑫眾潤
中國重汽 VG1095110096 渦輪增壓器總成 HX55W

中國重汽 VG1095110096 渦輪增壓器總成 HX55W


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
渦輪增壓型號Holset HX55W
OEM零件編號VG1095110096
廳集服務編號3776504, 3776505, 3776506
發動機應用Weichai WD615 / WP10 / WP12 / D12 Series (9.7L - 12.0L)
壓縮機誘導器直徑60 mm
壓縮機擴壓器直徑82 mm
渦輪輪直徑74 mm
渦輪機外殼A-R1.01 (Typical for WD615)
洩壓閥型別Integral Pneumatic Actuator
冷卻方式Oil Cooled Only
油口螺紋M18 x 1.5
油出口法蘭4-Bolt Pattern
壓縮機出口直徑60 mm (2.36 in)
渦輪進氣法蘭4-Bolt, ~85 mm ID
旋轉方向Clockwise (Viewed from Compressor Side)
適用排放標準Euro II / Euro III / Euro IV
淨重18.5 kg
包裝尺寸42 × 32 × 30 cm

製造號

  • 3776504
  • 3776505
  • 3776506
  • HX55W

主機廠號

  • VG1095110096

發動機號

  • Weichai WD615.47
  • Weichai WD615.69
  • Weichai WD615.87
  • Weichai WP10
  • Weichai WP12
  • Weichai D12
  • Weichai WD12

互換號

  • 3776504
  • 3776505
  • 3776506
  • HX55W

適配車型

  • Sinotruk HOWO 371 6x4
  • Sinotruk HOWO A7
  • Sinotruk Sitrak C7H
  • Sinotruk Steyr King
  • Shacman F3000
  • Shacman X3000
The VG1095110096 is a Holset HX55W frame-size turbocharger assembly designed for Weichai WD615 series heavy-duty diesel engines ranging from 9.7L to 12.0L displacement. It features a wastegated turbine housing for boost pressure regulation and an oil-cooled center housing rotating assembly (CHRA). The compressor wheel utilizes aluminum alloy construction; the turbine wheel is manufactured from high-nickel alloy (Inconel 713C or equivalent) to withstand exhaust gas temperatures exceeding 950°C. The unit integrates a pneumatic actuator for wastegate control. Direct OEM replacement for Sinotruk HOWO, Sitrak, and Steyr heavy-duty truck platforms equipped with WD615.47, WD615.69, WP10, WP12, D12, and WD12 engine variants. Service replacement includes CHRA cartridge (core) and complete rotating assembly kits. Cross-reference interchangeability exists with Holset service part numbers 3776504, 3776505, and 3776506. The turbocharger mounts to the exhaust manifold via a 4-bolt flange pattern specific to the WD615 engine block. Oil inlet thread M18x1.5; oil outlet flange 4-bolt. Compressor outlet diameter approximately 60mm (2.36 in); turbine inlet flange ID approximately 85mm. Designed for Euro II to Euro IV emission compliance depending on engine calibration.