
濰柴 WPB1000184203 渦輪增壓器進油管總成
極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
| 零件名稱 | Turbocharger Oil Inlet Pipe Assembly |
|---|---|
| 材質 | High-Temperature Alloy Steel / Stainless Steel |
| 進氣管螺紋尺寸 | M16 x 1.5 (Banjo) |
| 出口螺紋尺寸 | M14 x 1.5 (Banjo) |
| 總長度 | Approx 450 mm |
| 工作壓力 | Up to 1.5 MPa (217 PSI) |
| 工作溫度範圍 | -40°C to +150°C |
| 密封型別 | Copper/Aluminum Crush Washer |
| 淨重 | 0.85 kg |
製造號
- WPB1000184203
主機廠號
- WPB1000184203
發動機號
- Weichai WP10
- Weichai WP12
- Weichai WP13
- Weichai WP10.5
- Weichai WP12.5
- Weichai WP13.5
適配車型
- Shaanxi Heavy Duty Truck (Shacman) X3000
- Shaanxi Heavy Duty Truck (Shacman) F3000
- Sinotruk Howo T7H
- Sinotruk Howo T5G
- FAW Jiefang J6P
- FAW Jiefang J7
The WPB1000184203 turbocharger oil inlet pipe assembly is engineered to supply pressurized engine oil to the turbocharger center housing rotating assembly (CHRA). Constructed from high-temperature resistant steel tubing with precision-formed banjo fittings, it withstands thermal cycling and vibration inherent in heavy-duty diesel operation. The assembly includes integrated sealing surfaces compatible with copper or aluminum crush washers to prevent leakage at the block and turbocharger connection points.
This component is a direct replacement for Weichai part number WPB1000184203, validated for fitment on Weichai WP10, WP12, and WP13 series engines commonly installed in Shaanxi Heavy Duty Truck (Shacman), Sinotruk Howo, and FAW Jiefang platforms. Installation requires torqueing banjo bolts to OEM specifications (typically 25-30 Nm) and priming the oil line before engine start to prevent turbocharger bearing starvation.
同系技術配件與配套推薦

BY1011194462 渦輪增壓器回油管總成
BY1011194462Aftermarket

蓋瑞特 1118010-47X-0000S 渦輪增壓器總成
1118010-47X-0000SGarrett

濰柴 612600112175 渦輪增壓器回油管總成
612600112175Weichai

濰柴 612600190677 渦輪增壓器進油管總成
612600190677Weichai

濰柴 612600112569 渦輪增壓器進油管總成
612600112569Weichai

濰柴 1001994884 渦輪增壓器進油管總成
1001994884Weichai

濰柴 612600114600 渦輪增壓器回油管總成
612600114600Weichai

濰柴 WPB13066068 渦輪增壓器進油管總成
WPB13066068Weichai
