XZR8® 鑫眾潤
濰柴 WPB1000418215 渦輪增壓器總成

濰柴 WPB1000418215 渦輪增壓器總成


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
渦輪增壓器型別Variable Geometry Turbocharger (VGT)
執行器型別Electronic Actuator
壓縮機誘導器直徑62 mm
壓縮機擴壓器直徑88 mm
渦輪誘導器直徑70 mm
渦輪出口直徑60 mm
軸承系統Full Floating Journal Bearing
密封型別Piston Ring Seal
油口螺紋M18 x 1.5
油口直徑30 mm Flange
冷卻液介面Yes (Water Cooled CHRA)
應用排放標準Euro IV / Euro V / Euro VI
淨重18.5 kg
包裝尺寸42 × 32 × 30 cm

製造號

  • WPB1000418215

主機廠號

  • WPB1000418215
  • BY1003714086
  • BY1003178647
  • BY1004771612

發動機號

  • Weichai WP10
  • Weichai WP12
  • Weichai WP13

適配車型

  • Yutong Bus
  • Zhongtong Bus
  • Haige Bus
The WPB1000418215 is a variable geometry turbocharger (VGT) designed for Weichai WP10 and WP12 series heavy-duty diesel engines meeting Euro IV/V/VI emission standards. The unit integrates an electronic actuator for precise boost pressure control across the operating range. The compressor wheel and turbine wheel are matched for high-altitude performance and transient response typical of city bus duty cycles. The center housing rotating assembly (CHRA) utilizes a full-floating bearing system with piston ring seals. The turbine housing features an integrated wastegate/vanes mechanism controlled by the electronic actuator. This assembly replaces OEM references BY1003714086, BY1003178647, and BY1004771612. Installation requires calibration of the actuator position sensor via diagnostic tool after mounting. Oil supply and drain ports conform to Weichai WP10/WP12 engine block interfaces. Inlet and outlet flanges match standard Weichai exhaust manifold and charge air cooler piping.