XZR8® 鑫眾潤
濰柴 WPB1000889162Z 渦輪增壓器總成

濰柴 WPB1000889162Z 渦輪增壓器總成


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
OEM參考6126000889162
渦輪增壓器型別Wastegated, Journal Bearing, Fixed Geometry
發動機應用Weichai WP10 / WP12 / WP13 Series
潤滑方式Engine Oil Fed, Hydrodynamic Bearings
冷卻方式Oil Cooled Bearing Housing
洩壓閥驅動Pneumatic
壓縮機誘導器直徑68 mm (Estimated)
壓縮機擴壓器直徑92 mm (Estimated)
渦輪誘導器直徑76 mm (Estimated)
渦輪出口直徑68 mm (Estimated)
渦輪機外殼A-R1.15 (Estimated)
增壓壓力範圍1.2 - 1.5 bar
平衡標準ISO 1940-1 G2.5
淨重12.5 kg
包裝尺寸42 × 32 × 30 cm

製造號

  • WPB1000889162Z
  • 1000889162Z

主機廠號

  • 6126000889162
  • 1000889162Z

發動機號

  • Weichai WP10
  • Weichai WP12
  • Weichai WP13
  • Weichai WP10.5
  • Weichai WP12.5

互換號

  • 4046026

適配車型

  • Sinotruk Howo 371
  • Sinotruk Howo 420
  • Shacman F3000
  • FAW Jiefang J6P
  • Shaanxi Heavy Duty Truck
The WPB1000889162Z turbocharger assembly is engineered for Weichai WP10, WP12, and WP13 series heavy-duty diesel engines. It utilizes a journal bearing rotating assembly with a precision-installed seal between the compressor impeller and bearing bracket to effectively prevent oil migration into the intake tract. The turbine housing is constructed from high-nickel austenitic stainless steel to withstand sustained exhaust gas temperatures exceeding 950°C. The compressor cover incorporates a ported shroud design for surge margin improvement at low engine speeds. This unit serves as a direct replacement for OEM part numbers 1000889162Z and 6126000889162. The cartridge (CHRA) features hydrodynamic thrust and journal bearings lubricated by engine oil supply at 300-450 kPa. The wastegate actuator is pneumatic, calibrated for 1.2-1.5 bar boost pressure control. The unit is balanced to ISO 1940-1 G2.5 standards. Compatible with Sinotruk Howo, Shacman F3000, and FAW Jiefang heavy-duty truck platforms equipped with Weichai powerplants. Installation requires new oil feed and drain line gaskets, and priming of the bearing housing prior to engine start.