


1 / 3
MTU X52404500056 預燃室火花塞
極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
| 螺紋尺寸 | M18 × 1.5 mm |
|---|---|
| 偏移量 | 20.6 mm |
| 六角尺寸 | 20.8 mm |
| 座椅型別 | Flat |
| 接觸間隙 | 0.35 mm |
| 中心電極材料 | Double Iridium |
| 火花塞型別 | Pre-Chamber |
| 溫度範圍 | 77 |
| 安裝扭矩 | 50-60 Nm |
| 安裝螺栓扭矩 | 40-50 Nm |
| 應用系統 | Natural Gas / Biogas |
| 淨重 | 0.15 kg |
製造號
- X52404500056
- X52404500062
- X52404500059
- X52404500050
- X52404500049
- X52404500027
- X52404500039
- R6GC1-77M
- R6GC177M
主機廠號
- X52404500056
- X52404500062
- X52404500059
- X52404500050
- X52404500049
- X52404500027
- X52404500039
- 70700180049
發動機號
- MTU Series 4000
- MTU 16V/4000-L61
- MTU 16V4000L61
- MTU 4000L62
- MTU 4000L63
- MTU 4000L62FB
互換號
- 0004.800.986.00.07
- 00048009860007
- 18VGZ1-77
- 18VGZ177
- 0346-5123
- 03465123
- FB95WPV
- MPC1800
- MPC1900
- G-6005
- RB75WPCC
- E6014251
- 18VGZ 12-77
適配車型
- MTU Natural Gas Genset
- MTU Biogas Power Plant
- MTU Tr70
- MTU Tr60
- Terex TR50
- Terex TR60
- Terex TR100
Technical engineering specifications for MTU X52404500056 pre-chamber spark plug designed for Series 4000 gas engines. Thread specification M18 × 1.5 mm with 20.6 mm reach and 20.8 mm hex flat seat. Electrode gap 0.35 mm with double iridium construction for superior wear resistance. Installation torque 50-60 Nm in aluminum heads, 40-50 Nm in cast iron. Compatible with MTU 16V/4000-L61 and 16V4000L61 engine variants used in natural gas generator sets and biogas power plants. Thermal paste application recommended to reduce electrode temperature and extend service life. Cross-references include Federal Mogul 18VGZ1-77, Tenneco FB95WPV, TORCH R6GC1-77M, and Caterpillar 0346-5123.
Material composition features nickel-plated shell with iridium-enhanced center and ground electrodes. Pre-chamber design optimizes combustion stability under variable load conditions typical of continuous power generation duty cycles. Supersedes previous part numbers X52404500062, X52404500059, X52404500050, X52404500049, X52404500027, X52404500039. Final fitment verified against engine serial number and cylinder position.








