XZR8® 鑫眾潤
濰柴 Z20230053 渦輪增壓器進油管總成

濰柴 Z20230053 渦輪增壓器進油管總成


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
元件名稱Turbocharger Oil Feed Line / Oil Inlet Pipe
製造商Weichai Power
材質High-Temperature Alloy Steel Tubing with Steel Banjo Fittings
接頭型別Banjo Bolt with Copper Sealing Washers (Both Ends)
功能Pressurized Lubrication Supply to Turbocharger Bearings
工作壓力Engine Oil Pressure Range (Typical 300-600 kPa)
溫度等級-40°C to +150°C Continuous
淨重0.85 kg
包裝尺寸55 × 12 × 6 cm

製造號

  • Z20230053

主機廠號

  • Z20230053

發動機號

  • Weichai WP10
  • Weichai WP12
  • Weichai WD615
  • Weichai WP13
  • Weichai WP7

適配車型

  • Shaanxi Heavy Duty Shacman X3000
  • Shaanxi Heavy Duty Shacman F3000
  • Sinotruk Howo A7
  • Sinotruk Howo T7H
  • Foton Auman EST
  • Foton Auman GTL
  • Weichai Industrial Generator Sets
The Weichai Z20230053 turbocharger oil feed line serves as the critical lubrication supply conduit for the turbocharger bearing cartridge. It channels pressurized engine oil from the block gallery to the turbocharger center housing rotating assembly (CHRA), ensuring hydrodynamic bearing support at high rotational speeds. Constructed from high-temperature resistant steel tubing with swaged or brazed banjo bolt fittings at both ends, the assembly typically includes integrated copper sealing washers to prevent leakage under dynamic pressure cycles. The routing is engineered to withstand engine vibration and thermal expansion differentials between the block and turbocharger housing. This component is a direct replacement for Weichai OEM part number Z20230053. It is applicable to Weichai WP10, WP12, WD615, and WP13 series diesel engines commonly installed in Shaanxi Heavy Duty (Shacman), Sinotruk (Howo), and Foton Auman heavy-duty trucks, as well as Weichai industrial generator sets. Regular inspection for fatigue cracking at flare nuts and banjo bolt seats is recommended during scheduled maintenance intervals.