XZR8®
BRP 420665785 ECM Electronic Control Module Assembly

BRP 420665785 ECM Electronic Control Module Assembly


Express Free Shipping
3-Year Factory Warranty
90-Day Hassle-Free Returns
24/7 Dedicated Support
Rated Voltage12V DC
Communication ProtocolCAN Bus (BRP BUDS/CanDoo)
Operating Temperature Range-40°C to +85°C
Ingress Protection RatingIP67
Connector TypeBRP Specific Multi-Pin Sealed Connector
Engine ApplicationRotax 1503 4-TEC Supercharged 215HP
Net Weight1.5 kg
Package Dimensions20 × 15 × 5 cm

Manufacturer No.

  • 420665785

OEM Part No.

  • 420665785

Engine Part No.

  • Rotax 1503 4-TEC 215HP

Fitment Vehicles

  • 2007 Sea-Doo GTX Ltd
  • 2007 Sea-Doo GTX Wake
  • 2007 Sea-Doo RXP Supercharged
  • 2007 Sea-Doo RXT
The BRP 420665785 Electronic Control Module (ECM), also referenced as the Electronic Box or MCM Module, is the primary engine management computer for specific 2007 Sea-Doo 4-TEC personal watercraft. This unit processes inputs from crankshaft position, throttle position, manifold absolute pressure, and temperature sensors to calculate precise fuel injection duration and ignition advance curves for the Rotax 1503 4-TEC 215HP supercharged engine. The module housing is a sealed, waterproof enclosure designed for the harsh marine environment, featuring a multi-pin connector interface specific to the BRP vehicle communication network. It contains non-volatile memory storing calibration maps, fault code history, and vessel identification data. This ECM supports diagnostic communication via the BRP BUDS/CanDoo protocol for dealer-level troubleshooting, software updates, and parameter monitoring. Direct OEM replacement for Sea-Doo part number 420665785. Compatible with 2007 model year GTX Limited, GTX Wake, RXP Supercharged, and RXT models equipped with the 215HP Rotax 4-TEC powerplant. No programming required if replaced with same part number unit; VIN learning occurs automatically on first key cycle.