XZR8® 鑫眾潤
中國重汽 1000045205 渦輪增壓器進油管總成
中國重汽 1000045205 渦輪增壓器進油管總成 - Image 2
1 / 2

中國重汽 1000045205 渦輪增壓器進油管總成


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
元件型別Turbocharger Oil Feed Pipe Assembly
應用領域Heavy Duty Diesel Engine Turbocharger Lubrication
材質Carbon Steel Tube / Stainless Steel Braided Hose / Forged Steel Fittings
連線型別Banjo Fitting / Flared Tube / Threaded Port
螺紋規格Metric M14x1.5 / M16x1.5 (Typical)
最大工作壓力4.0 MPa (Engine Oil Pressure)
爆破壓力> 10 MPa
工作溫度範圍-40°C to +150°C
OEM交叉參考1000045205
淨重0.85 kg
包裝尺寸40 × 15 × 5 cm

製造號

  • 1000045205

主機廠號

  • 1000045205

發動機號

  • Sinotruk WD615
  • Weichai WP10
  • Weichai WP12
  • Sinotruk MC11

適配車型

  • Sinotruk Howo 371
  • Sinotruk Howo 375
  • Sinotruk Howo A7
  • Sinotruk Sitrak C7H
  • Sinotruk Hohan N7
The 1000045205 turbocharger oil feed pipe assembly is designed for Sinotruk heavy-duty diesel engines, specifically the WD615 series. It channels pressurized engine oil from the main gallery to the turbocharger center housing rotating assembly (CHRA), ensuring hydrodynamic bearing lubrication and cooling. Construction utilizes high-temperature resistant steel tubing with brazed or flared end fittings, often incorporating a flexible braided stainless steel hose section to accommodate engine vibration and thermal expansion. The assembly includes integrated banjo bolts or threaded connectors with sealing surfaces machined to OEM tolerances. It is a direct replacement for the factory-installed line, requiring no modification during installation. Critical inspection points include verification of internal bore clearance, fitting thread integrity (typically M14x1.5 or M16x1.5 metric), and hose burst pressure rating exceeding 10 MPa. Regular replacement is recommended during major engine overhauls or turbocharger replacement to prevent oil starvation failures caused by carbon deposit blockage or metal fatigue cracking.