XZR8® 鑫眾潤
中國重汽 BY1001752916 渦輪增壓器總成

中國重汽 BY1001752916 渦輪增壓器總成


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
渦輪增壓機體Holset HX50W
執行器型別Variable Geometry Turbo (VGT) Pneumatic
執行器程式碼VG1560118229
發動機應用Sinotruk WD615.47 9.726L I6
發動機功率371 HP (273 kW) @ 2200 rpm
發動機峰值扭矩1500 N·m @ 1200-1600 rpm
排放標準Euro II
吸氣型別Turbocharged & Intercooled
壓縮機誘導器直徑62 mm (estimated HX50W)
渦輪出口直徑78 mm (estimated HX50W)
潤滑方式Engine Oil Fed, 300-400 kPa
冷卻劑冷卻外殼No (Oil Cooled Only)
進風口法蘭型別Sinotruk WD615 Specific 4-Bolt
出口法蘭型別Sinotruk WD615 Specific 4-Bolt V-Band
淨重21.5 kg
包裝尺寸42 × 32 × 30 cm

製造號

  • BY1001752916
  • VG1560118229
  • HX50W

主機廠號

  • BY1001752916

發動機號

  • Sinotruk WD615.47
  • Sinotruk WD615
  • Weichai WD615

適配車型

  • Sinotruk HOWO 371
  • Sinotruk HOWO TX371
  • Sinotruk HOWO Dump Truck 6x4
  • Sinotruk HOWO Tractor Truck 6x4
  • Sinotruk HOWO Mixer Truck 8x4
The BY1001752916 turbocharger assembly is designed for the Sinotruk WD615 series 9.726 liter inline six-cylinder diesel engines, specifically the WD615.47 Euro II emission variant rated at 371 HP (273 kW). This unit utilizes a Holset HX50W frame with a variable geometry turbine (VGT) mechanism, identified by the actuator reference VG1560118229. The compressor and turbine housings are configured for the HOWO vehicle platform intake and exhaust manifold interfaces. The rotor assembly incorporates a high-inertia compressor wheel and a forged milled compressor wheel (FMW) turbine wheel rated for sustained exhaust gas temperatures exceeding 850°C. Bearing system employs a fully floating journal bearing and thrust bearing assembly lubricated by engine oil supply at 300-400 kPa. The VGT actuator is pneumatically controlled via the engine ECU to optimize boost pressure across the 1200-1600 rpm peak torque range of 1500 N·m. This assembly replaces the complete OEM turbocharger unit including the center housing rotating assembly (CHRA) and actuator. OEM cross-reference includes Sinotruk part number BY1001752916 and Holset service number VG1560118229. Application fitment covers Sinotruk HOWO 371 HP series vehicles including TX371 tractor trucks, dump trucks, and mixer trucks equipped with the WD615.47 engine. Installation requires new gasket kit, oil feed line inspection, and ECU calibration verification for VGT actuator position learning.