XZR8® 鑫眾潤
丹佛斯 151B2053 擺線液壓馬達 OMT315

丹佛斯 151B2053 擺線液壓馬達 OMT315


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
標稱排量315 cc/rev
排量326.3 cm3/rev
最大連續速度240 rpm
最大待機速度460 rpm
額定壓力200 bar
間歇壓力240 bar
峰值壓力280 bar
最大持續扭矩1020 Nm
最大扭矩1220 Nm
軸型別Cylindrical 1-1/2 in with 3/8-16 UNC Tap
傳動軸鍵齒3/8 x 3/8 x 2-1/4 in
安裝法蘭SAE A 2-Bolt (US Standard)
埠型別Side Ports
埠螺紋尺寸1-1/16-12 UN-2B (SAE 12)
殼體排油口G 1/4 (BSPP)
軸承型別Tapered Roller Bearing
密封件套件零件編號151B0113
轉速Bi-directional
電機型別Orbital (Geroler)
淨重11.5 kg

製造號

  • 151B2053
  • OMT315-151B2053
  • 151B-2053

互換號

  • BMT-315-4-M-D
The Danfoss 151B2053 is an OMT series orbital hydraulic motor utilizing Geroler gear set technology for high torque output at low speeds. It features a tapered roller bearing arrangement supporting high radial and axial loads, enabling direct drive of sprockets or winches. The motor incorporates a high-pressure shaft seal with integrated check valves for internal flushing, ensuring reliable operation in contaminated environments. Standard configuration includes a SAE A 2-bolt mounting flange, 1-1/2 inch cylindrical output shaft with 3/8-16 UNC tapped hole and 3/8 inch square key, and side-mounted SAE 12 (1-1/16-12 UN) work ports with a G 1/4 (BSPP) case drain port. Designed for open and closed loop circuits in construction, agricultural, and material handling equipment.