XZR8® 鑫眾潤
丹佛斯 151B3003 OMT 315 擺線液壓馬達
丹佛斯 151B3003 OMT 315 擺線液壓馬達 - Image 2
1 / 2

丹佛斯 151B3003 OMT 315 擺線液壓馬達


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
排量326.3 cm³/rev
標稱排量315 cc/rev
最大連續速度380 rpm
最大待機速度460 rpm
最大持續扭矩950 Nm
最大持續壓力200 bar
Max Intermittent Pressure240 bar
最大功率33.5 kW
輸出軸Cylindrical 40 mm with keyway A12x8x70 DIN 6885
安裝法蘭4-bolt square, pilot 125 mm, bolt circle 160 mm
埠數量G 3/4 (3/4 BSP)
Drain PortG 1/4
重量22 kg
軸承型別Tapered roller bearings
密封型別High pressure shaft seal
內部洩漏Yes
旋轉方向Bi-directional
流體相容性Mineral based hydraulic fluids
包裝尺寸35 × 25 × 25 cm

製造號

  • 151B3003
  • OMT315
  • OMT 315
  • 151B-3003
  • OMT315-151B3003
  • OMT315151B3003

互換號

  • BMT315
  • Hanjiu BMT315
  • Blince BMT315
  • Gerotor BMT315
  • ZEEGII OMT315
  • HOLDWELL OMT315
  • MovYard OMT315
The Danfoss 151B3003 is a low-speed high-torque orbital hydraulic motor from the OMT series. It features a geometric displacement of 326.3 cm³/rev (315 cc nominal) with a cylindrical 40 mm output shaft and keyway per DIN 6885. The motor uses a 4-bolt square mounting flange with 125 mm pilot diameter and 160 mm bolt circle. Port connections are G 3/4 (3/4 BSP) for main pressure lines and G 1/4 for drain. Continuous operating pressure is 200 bar with intermittent peaks to 240 bar. Maximum continuous speed is 380 rpm delivering 950 Nm torque. The unit weighs approximately 22 kg and includes tapered roller bearings for high radial and axial load capacity. Internal flush valves and high-pressure shaft seals ensure reliability in contaminated environments. This motor serves as a direct replacement for Sauer-Danfoss OMT 315 series in construction, agricultural, and industrial machinery.