XZR8® 鑫眾潤
康明斯 3087587 燃油噴油器總成
康明斯 3087587 燃油噴油器總成 - Image 2
康明斯 3087587 燃油噴油器總成 - Image 3
康明斯 3087587 燃油噴油器總成 - Image 4
康明斯 3087587 燃油噴油器總成 - Image 5
1 / 5

康明斯 3087587 燃油噴油器總成


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
元件型別PT/STC Fuel Injector Assembly
燃油系統PT (Pressure-Time) with STC (Step Timing Control)
執行方式Mechanical Cam / Hydraulic / Solenoid Timing
噴嘴配置Multi-hole (Typically 7 x 0.25 mm for K19)
開啟壓力~280-300 bar (Calibration Dependent)
噴油器夾緊扭矩60-70 Nm
機體材料High-Strength Alloy Steel
淨重1.20 kg
包裝尺寸 LxWxH23.0 x 9.0 x 6.0 cm
HS編碼8409.99

製造號

  • 3087587
  • 3095773
  • 3076702
  • 3076703
  • 3077716
  • 3016675
  • 3016676
  • 3076130
  • 4940170
  • 4955525

主機廠號

  • 3087587

發動機號

  • Cummins K19
  • Cummins KTA19
  • Cummins QSK19
  • Cummins KTA19-M3
  • Cummins K38
  • Cummins KTA38
  • Cummins K50
  • Cummins KTA50
  • Cummins K1150 Series

互換號

  • P-3087587
  • C3087587
  • 3016675
  • 3016676
  • 3076130
  • 4940170
  • 4955525
  • 3076702
  • 3076703
  • 3077716

適配車型

  • BelAZ 75131 Mining Truck
  • BelAZ 7560 Series Mining Truck
  • Hitachi EH3500 / EH4000 Dump Trucks
  • Sany Heavy Industry SKT90 / SKT100 Dump Trucks
  • Hyundai R330 / R450 Excavators
  • Komatsu 730E / 830E Haul Trucks
  • Cummins KTA19-G / KTA38-G / KTA50-G Generator Sets
  • Marine Propulsion: KTA19-M3, KTA38-M, KTA50-M
The Cummins 3087587 is a PT (Pressure-Time) fuel injector with STC (Step Timing Control) capability, engineered for the Cummins K19, K38, and K50 large-bore diesel engine platforms. It utilizes a mechanically actuated, hydraulically controlled injection principle with a solenoid valve for injection timing modulation on QSK19 and marine variants. The injector body is manufactured from high-strength alloy steel with precision-machined internal passages to withstand peak firing pressures exceeding 140 MPa. The nozzle assembly features a multi-hole spray tip (typically 7-hole x 0.25mm configuration for K19) calibrated for specific combustion bowl geometry. This part serves as a direct OEM replacement for Chongqing Cummins (CCEC) produced engines including KTA19-C, KTTA19-C, KTA38-C, KTA50-C, and marine ratings KTA19-M3, KTA38-M, KTA50-M. The injector incorporates a replaceable nozzle valve set (needle and seat) and a lower O-ring seal kit for maintenance. It interfaces with the PT fuel pump (e.g., PTG-AFC, PTG-EFC) via high-pressure fuel lines. Installation requires torque specification of 60-70 Nm for the injector hold-down clamp and verification of injector protrusion depth. Cross-referenced supersession includes part numbers 3095773, 3076702, and 3077716 for specific calibration codes. This component is critical for fuel metering accuracy, emissions compliance (IMO Tier II / EPA Tier 2 equivalent), and cold-start performance in heavy-duty mining haul trucks and stationary power generation.