XZR8® 鑫眾潤
東風 3615010-KJ1QF 後處理控制模組總成

東風 3615010-KJ1QF 後處理控制模組總成


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
額定電壓24V DC
工作電壓範圍18V - 32V DC
通訊協議SAE J1939 CAN Bus
功能SCR Aftertreatment Control, Urea Dosing, NOx Monitoring, Heater Management
工作溫度範圍-40°C to +85°C
防護等級IP67
外殼材料Die-cast Aluminum
淨重1.0 kg
包裝尺寸20 × 15 × 8 cm

製造號

  • 3615010-KJ1QF
  • 3615010-KJ1QB
  • 3615010-KJ1Q1
  • 3615010-T68M4
  • 3615010-T25FD
  • 3615010-TF980
  • 3615010-TL381

主機廠號

  • 3615010-KJ1QF

發動機號

  • Cummins ISLe
  • Cummins ISLe EU3
  • Cummins ISLe EU4
  • Cummins ISLe EU5

適配車型

  • Dongfeng Yulong 8x4
  • Dongfeng Tianlong
  • Dongfeng Tianjin
  • Yutong Bus
  • Kinglong Bus
This Aftertreatment Control Module (ACM), also designated as Dosing Control Unit (DCU), governs the Selective Catalytic Reduction (SCR) system on heavy-duty commercial vehicles. It precisely controls urea injection dosing, monitors NOx sensor signals, and manages heater circuits for the urea tank and lines. The unit communicates via SAE J1939 CAN protocol with the Engine Control Module (ECM) and vehicle network. Designed for 24V electrical systems, it operates within an ambient temperature range of -40°C to +85°C and meets IP67 ingress protection standards for chassis mounting. The aluminum housing provides EMI shielding and thermal dissipation for internal power drivers. Connector interface utilizes a sealed multi-pin automotive connector compatible with Dongfeng Yulong and Tianlong chassis harnesses. This assembly replaces Dongfeng part numbers 3615010-KJ1QB, 3615010-KJ1Q1, and 3615010-T68M4 variants. Calibration is specific to Cummins ISLe Euro III/IV/V engine aftertreatment configurations.