
康明斯 3615710-T25F0 氮氧化物感測器總成
極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
| 額定電壓 | 24V DC |
|---|---|
| 訊號協議 | CAN Bus (J1939) / PWM |
| 螺紋尺寸 | M18 x 1.5 |
| 測量範圍 | 0 - 500 ppm NOx |
| 排氣工作溫度 | -40°C to +850°C |
| 加熱功率 | Approx. 20W |
| 聯結器型別 | 4-Pin / 5-Pin Sealed (Deutsch/AMP) |
| 防護等級 | IP69K |
| 安裝扭矩 | 50 Nm |
| 淨重 | 0.35 kg |
製造號
- 3615710-T25F0
- 5WK96714
主機廠號
- 3615710-T25F0
發動機號
- Dongfeng Cummins ISDe
- Dongfeng Cummins ISD
- Dongfeng Cummins ISLe
- Dongfeng Cummins C Series
- Dongfeng Cummins L Series
- Dongfeng Renault DCi11
- Dongfeng DDi Series
互換號
- 5WK96714
- 89463-H56A0
適配車型
- Dongfeng Tianlong Flagship
- Dongfeng Tianlong
- Dongfeng Tianjin
- Dongfeng Dali Shen
The 3615710-T25F0 nitrogen oxide (NOx) sensor is designed for selective catalytic reduction (SCR) aftertreatment systems on Dongfeng Cummins heavy-duty diesel engines. It utilizes a planar zirconia sensing element with integrated heater control to measure NOx concentration in exhaust gas streams, providing real-time data to the engine control module (ECM) for precise urea dosing.
Constructed with a high-temperature alloy housing and stainless steel probe tip, the sensor withstands exhaust gas temperatures up to 850 degrees Celsius. The assembly includes a sealed electrical connector meeting IP69K protection standards for vibration and moisture resistance in heavy truck applications. The sensor communicates via CAN bus protocol (J1939) or PWM signal depending on ECM calibration.
Direct OEM replacement for Dongfeng Commercial Vehicle platforms including Tianlong, Tianjin, and Dali Shen series equipped with ISDe, ISD, ISLe, C Series, and L Series engines. Also applicable to Dongfeng Renault DCi11 and DDi engine platforms requiring SCR NOx monitoring. Installation requires torque specification of 50 Nm on M18x1.5 threaded bung. Service life typically rated for 8,000 operating hours or 500,000 kilometers under normal duty cycles.








