XZR8® 鑫眾潤
北奔 BY1001876000 渦輪增壓器進油管總成

北奔 BY1001876000 渦輪增壓器進油管總成


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
零件型別Turbocharger Oil Feed Pipe Assembly
軟管材料Stainless Steel Braided PTFE or CPE Synthetic Rubber
接頭型別Banjo / Banjo (Crimped)
花鍵螺栓螺紋M14 x 1.5 / M16 x 1.5 (Typical)
最大工作壓力1.5 MPa / 217 PSI
最大工作溫度150 °C / 302 °F
總長度450 mm / 17.7 in
應用領域Heavy Duty Diesel Truck Turbo Lubrication
淨重0.85 kg
包裝尺寸40 × 15 × 8 cm

製造號

  • BY1001876000

主機廠號

  • BY1001876000

發動機號

  • Weichai WP10
  • Weichai WP12
  • Weichai WP13
  • Weichai WP10.5
  • Weichai WP12.5

適配車型

  • Beiben V3 Series
  • Beiben NG80 Series
  • Beiben 2529
  • Beiben 2534
  • Beiben 2538
  • Beiben 2542
  • Beiben 3138
  • Beiben 3142
  • Beiben 4142
The BY1001876000 turbocharger oil feed pipe assembly is engineered to deliver pressurized engine oil from the block gallery to the turbocharger bearing cartridge. It is constructed from high-temperature resistant synthetic rubber inner tube reinforced with single or double layer stainless steel wire braid, terminated with crimped banjo fittings incorporating integrated sealing surfaces. This assembly withstands continuous operating temperatures up to 150°C (302°F) and peak pressure spikes exceeding 1.5 MPa typical of heavy-duty diesel turbocharger lubrication circuits. The banjo bolts feature precision-drilled orifices to regulate flow rate per OEM calibration. Copper or aluminum crush washers are required for sealing at the banjo connections (sold separately or included in kit configuration). Direct replacement for Beiben (North Benz) heavy truck applications utilizing Weichai WP10, WP12, and WP13 series diesel engines. Verified dimensional interchangeability with OEM routing geometry ensures clearance against exhaust manifolds and structural members. Installation torque for banjo bolts typically 25-30 Nm. Inspect for hose cracking, braid corrosion, or fitting distortion during scheduled maintenance intervals.