XZR8® 鑫眾潤
濰柴 BY612600115308 增壓器進油管總成
濰柴 BY612600115308 增壓器進油管總成 - Image 2
濰柴 BY612600115308 增壓器進油管總成 - Image 3
濰柴 BY612600115308 增壓器進油管總成 - Image 4
1 / 4

濰柴 BY612600115308 增壓器進油管總成


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
零件型別Turbocharger Oil Feed Pipe Assembly
材質High-Temperature Alloy Steel / Forged Steel Fittings
進氣管螺紋M14 x 1.5 Banjo (Engine Block)
出口螺紋M12 x 1.5 Banjo (Turbocharger Housing)
節流孔1.5 mm (Integrated)
總長度Approx. 450 mm
工作壓力1.5 MPa Max
工作溫度範圍-40°C to +150°C
淨重0.85 kg
包裝尺寸45 × 15 × 10 cm

製造號

  • BY612600115308

主機廠號

  • 612600115308

發動機號

  • Weichai WP6
  • Weichai WP6C
  • Weichai WP4
  • Weichai Deutz 226B

適配車型

  • Sinotruk Howo 371
  • Shacman F3000
  • FAW Jiefang J6P
  • Shantui SD22 Bulldozer
  • LiuGong CLG922 Excavator
The BY612600115308 turbocharger oil feed pipe assembly is engineered for Weichai WP4, WP6, and Deutz 226B series diesel engines. It channels pressurized engine oil from the block gallery to the turbocharger center housing rotating assembly (CHRA) for lubrication and cooling of the journal bearings. Constructed from high-temperature resistant steel tubing with forged banjo fittings, the assembly includes integrated restrictor orifice to regulate flow rate per OEM specification. End connections feature precision-machined sealing surfaces compatible with copper crush washers. Designed to withstand thermal cycling and vibration loads inherent in heavy-duty commercial vehicle and construction machinery duty cycles. Direct replacement for Weichai part number 612600115308. Verified fitment for Holset HX35/HX40 frame turbochargers mounted on WP6 engine platforms. Installation requires torque tightening of banjo bolts to 25-30 Nm with new sealing washers.