XZR8® 鑫眾潤
ComAp ID-RPU 冗餘保護單元
ComAp ID-RPU 冗餘保護單元 - Image 2
ComAp ID-RPU 冗餘保護單元 - Image 3
1 / 3

ComAp ID-RPU 冗餘保護單元


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
功能Redundant Protection Unit
控制器相容性ComAp InteliDrive DCU Marine
數字輸入8
數字輸出4
模擬輸入通道4
通訊協議RS232, CAN, Modbus RTU
安裝扭矩0.25 Nm
工作電壓8-36 V DC
淨重0.5 kg
包裝尺寸15 × 10 × 5 cm

製造號

  • ID-RPU

發動機號

  • Volvo Penta D5
  • Volvo Penta D7
  • Volvo Penta D9
  • Volvo Penta D16

適配車型

  • Volvo Penta D5 MH
  • Volvo Penta D7 MH
  • Volvo Penta D9 MH
  • Volvo Penta D16 MH
The ComAp ID-RPU serves as a Redundant Protection Unit designed for the InteliDrive DCU Marine controller system. It functions as a backup module for marine engine applications ensuring basic engine protection functionality when the main DCU unit fails. The ID-RPU itself cannot start the engine as the starter is controlled exclusively by the ID-DCU Marine controller. The module features 8 digital inputs, 4 digital outputs, and 4 analog inputs for sensor monitoring and actuator control. Communication interfaces include RS232 serial connection and CAN bus with Modbus RTU protocol support. The unit mounts with a maximum tightening torque of 0.25 Nm for the main screw. It is engineered for robust marine environments and integrates with ComAp InteliConfig software for configuration. Primary application covers Volvo Penta D5, D7, D9, and D16 MH series marine diesel engines equipped with ComAp InteliDrive DCU Marine control systems. The unit provides redundant overspeed protection, oil pressure, and coolant temperature monitoring independent of the main controller processor.