XZR8® 鑫眾潤
杭州叉車 XF250-214000-000 轉向機總成
杭州叉車 XF250-214000-000 轉向機總成 - Image 2
1 / 2

杭州叉車 XF250-214000-000 轉向機總成


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
排量125 cm3/rev
最大工作壓力17.5 MPa
額定流量30 L/min
埠型別SAE O-Ring Boss
外殼材料Cast Iron
捲筒材料Hardened Steel
淨重5.8 kg
認證CE, ISO 9001:2015
條件100% Brand New
顏色Black
包裝尺寸25 × 18 × 15 cm

製造號

  • XF250-214000-000
  • XF250214000000
  • ZGXF250-214000-000

主機廠號

  • XF250-214000-000
  • XF250214000000
  • ZGXF250-214000-000

互換號

  • BZZ5-E125BA-D
  • N163-214000-00

適配車型

  • Hangcha XF Series CPCQ30-35
  • Hangcha XF250 CPCQ30-35
  • Hangcha HC Forklift XF250
The XF250-214000-000 steering orbitrol is a hydraulic steering control unit designed for Hangcha XF series internal combustion forklifts rated 3.0-3.5 ton capacity. This component integrates a rotary valve and gerotor set to convert steering wheel input into proportional hydraulic flow for the steer cylinder. Constructed with a cast iron housing and hardened steel spool-valve assembly, the unit operates at system pressures up to 17.5 MPa (2500 psi) typical for forklift hydrostatic steering circuits. The orbitrol provides 125 cm³/rev displacement with a maximum flow rating of 30 L/min. Port configuration follows SAE J514 O-ring boss standards: P (pump), T (tank), L/R (cylinder ports). OEM cross-references include Hangcha part numbers XF250-214000-000, XF250214000000, and ZGXF250-214000-000. Aftermarket interchange references include BZZ5-E125BA-D and N163-214000-00. Repair kit XF250-214000-000-KIT is available for seal and wear-component overhaul. Unit weight is 5.8 kg. Certified to CE and ISO 9001:2015 quality standards.