
濰柴 612630110684 渦輪增壓器進油管總成
極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
| 元件型別 | Turbocharger Oil Inlet Pipe Assembly |
|---|---|
| 材質 | Carbon Steel Tube with Forged Steel Banjo Fittings |
| 連線型別 | Banjo Bolt / Flare Fitting |
| 螺紋尺寸 | M14 x 1.5 (Typical) |
| 工作壓力 | 0.4 - 0.6 MPa (Engine Oil Pressure) |
| 工作溫度範圍 | -40°C to 150°C |
| 表面處理 | Zinc Phosphate / Dacromet Coating |
| 淨重 | 0.65 kg |
製造號
- 612630110684
主機廠號
- 612630110684
發動機號
- Weichai WP10
- Weichai WP12
- Weichai WP13
- Weichai WP10H
- Weichai WP12G
- Weichai WP13G
適配車型
- Sinotruk HOWO
- Sinotruk HOWO A7
- Shacman F3000
- Shacman X3000
- FAW J6P
- FAW J7
The 612630110684 turbocharger oil inlet pipe assembly is engineered to deliver pressurized engine oil from the main oil gallery to the turbocharger bearing housing. Manufactured to Weichai OEM specifications, the assembly consists of a rigid steel tube or flexible hose section with crimped or brazed banjo fittings at both ends, incorporating integrated sealing surfaces for copper washers. It is designed to withstand high thermal cycles and vibration loads typical of heavy-duty diesel operation. This component is critical for maintaining turbocharger rotor lubrication and cooling, preventing premature bearing failure due to oil starvation. Direct replacement for Weichai WP10, WP12, and WP13 series engines installed in Sinotruk HOWO, Shacman, and FAW heavy-duty truck platforms. Installation requires torque tightening of banjo bolts to specified values and verification of oil flow upon engine start.
同系技術配件與配套推薦

陝汽 BY612600112476 渦輪增壓器進油管總成
BY612600112476Shacman

濰柴 612600190926 渦輪增壓器進油管總成
612600190926Weichai

濰柴 612630110612 渦輪增壓器隔熱罩
612630110612Weichai

中國重汽 1003346259 渦輪增壓器進水管總成
1003346259Sinotruk

濰柴 1009751289 渦輪增壓器隔熱罩總成
1009751289Weichai

BY1011194462 渦輪增壓器回油管總成
BY1011194462Aftermarket

中國重汽 X10022194 渦輪增壓器進油管總成
X10022194Sinotruk

中國重汽 1000045205 渦輪增壓器進油管總成
1000045205Sinotruk
