XZR8® 鑫眾潤
陝汽BY1006644555渦輪增壓器進油管總成

陝汽BY1006644555渦輪增壓器進油管總成


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
零件型別Turbocharger Oil Inlet Pipe Assembly
材質High-Temperature Alloy Steel / Stainless Steel Braided Hose
連線型別Banjo Fitting / Flared Tube Ends
螺紋尺寸M14 x 1.5 / M16 x 1.5 (Typical Banjo Bolt)
最大工作壓力0.5 MPa (72.5 PSI)
工作溫度範圍-40°C to 150°C
OEM參考BY1006644555
淨重0.5 kg

製造號

  • BY1006644555

主機廠號

  • BY1006644555
  • BY612650110057

發動機號

  • Weichai WP10
  • Weichai WP12
  • Weichai WP13
  • Cummins ISMe
  • Cummins ISLe

適配車型

  • Shacman F3000
  • Shacman M3000
  • Shacman X3000
  • Shacman H3000
The BY1006644555 turbocharger oil inlet pipe assembly is engineered for Shacman heavy-duty commercial vehicles. It channels pressurized engine oil from the main gallery to the turbocharger center housing rotating assembly (CHRA), providing critical lubrication and cooling for the turbine and compressor shaft bearings. Constructed from high-temperature resistant steel tubing with crimped banjo fittings or flared ends, this assembly withstands engine oil pressures up to 0.5 MPa and temperatures exceeding 150°C. The design incorporates precise bend radii to fit the engine compartment routing of Weichai WP10, WP12, and WP13 series diesel engines commonly equipped on Shacman F3000, M3000, and X3000 platforms. Installation requires new copper sealing washers at banjo bolt connections to prevent leakage. Regular inspection for carbon buildup or cracking is recommended during major service intervals to prevent turbocharger failure due to oil starvation.